STET

D6K2 – TRATORES DE RASTOS

  • ColeçãoColeçãoTRATORES DE RASTOS
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel

Descrição

The D6K2 dozer is smarter and more efficient than ever. It comes equipped with GRADE technologies like Slope Assist and GRADE with 3D to make it easier for even less experienced operators to get more quality work done in less time. But intelligence is only part of the package – Eco Modes and a new power train deliver up to 17 percent more fuel efficiency, while providing superior maneuverability, faster steering response and greater capability to utilize full blade loads. This dozer also retains its optimal balance and undercarriage design for outstanding performance in finish grading applications.

Informações Tećnicas

  • Flywheel Power: 97 kW
  • Operating Weight: 13271 kg

Mais informações

Engine

  • Engine Model: Cat C4.4
  • Flywheel Power: 97 kW / 130 HP
  • Bore: 105 mm / 4.13 in
  • Stroke: 127 mm / 4.99 in
  • Displacement: 4.4 l / 268.5 in³
  • Emissions: U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4
  • Engine Power – Maximum – ISO 14396: 117 kW / 157 HP
  • Engine Power – Maximum – ISO 14396 (DIN): 117 kW / 159 HP
  • Engine Power – Maximum – SAE J1995: 119 kW / 160 HP
  • Net Power (Rated) – ISO 9249: 97 kW / 130 HP
  • Net Power (Rated) – SAE J1349: 95 kW / 128 HP
  • Net Power (Rated) – ISO 9249 (DIN): 132 HP / 132 HP
  • Note (1): All non road Tier 4 Interim and Final, Stage IIIB and IV, Japan 2014 (Tier 4 Final) and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
  • Note (2): Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
  • Note (3): Engine ratings at 2,200 rpm
  • Note (4): Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, alternator, A/C compressor at full load and cooling fan at maximum speed.
  • Note (5): No engine derating required up to 3000 m (9,840 ft) altitude; beyond 3000 m (9,840 ft) automatic derating occurs.
  • Power – Net: 97 kW / 130 HP

Service Refill Capacities

  • Fuel Tank: 260 l / 69 gal (US)
  • Cooling System: 30 l / 7.9 gal (US)
  • Hydraulic Tank: 64 l / 16.9 gal (US)
  • Final Drive – Each – XL/LGP: 18.5 l / 4.9 gal (US)
  • Engine Crankcase: 11 l / 2.9 gal (US)
  • DEF Tank: 19 l / 5 gal (US)

Weights

  • Operating Weight: 13271 kg / 29258 lb
  • Note (1): Operating weights: includes EROPS, A/C, lights, VPAT Dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, Cat Comfort Series air suspension seat and operator.
  • Operating Weight – LGP: 13909 kg / 30664 lb
  • Operating Weight – XL: 13271 kg / 29258 lb
  • Shipping Weight – LGP: 13634 kg / 30058 lb
  • Shipping Weight – XL: 12996 kg / 28651 lb
  • Note (2): Shipping weights: includes EROPS, A/C, lights, VPAT Dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 10% fuel, Cat Comfort Series air suspension seat.

Undercarriage

  • Ground Contact Area (ISO 16754) – LGP: 4.46 m² / 6912 in²
  • Ground Contact Area (ISO 16754) – XL: 3.27 m² / 5070 in²
  • Ground Pressure (ISO 16754) – LGP: 31.1 kPa / 4.5 psi
  • Ground Pressure (ISO 16754) – XL: 40.5 kPa / 5.9 psi
  • Grouser Height – ES Shoe: 57 mm / 2.2 in
  • Grouser Height – MS Shoe: 48 mm / 1.9 in
  • Shoes/Side – XL/LGP: 40
  • Track Gauge – LGP: 2000 mm / 79 in
  • Track Gauge – XL: 1770 mm / 70 in
  • Track Rollers/Side – XL/LGP: 8
  • Track on Ground – XL/LGP: 2645 mm / 104 in
  • Width – Shoe – LGP: 760 mm / 30 in
  • Width – Shoe – XL: 560 mm / 22 in

Blades

  • Blade Type: VPAT, VPAT Foldable*
  • Blade Capacity – LGP, VPAT: 3.81 m³ / 4.98 yd³
  • Blade Capacity – XL, VPAT: 3.26 m³ / 4.26 yd³
  • Blade Width – Over End Bits – LGP, VPAT: 3682 mm / 12 ft
  • Blade Width – Over End Bits – XL, VPAT: 3196 mm / 10.5 ft
  • Note: *VPAT foldable blades have the same capacity and width as the XL/LGP VPAT blades.

Ripper

  • Each Additional Shank: 34 kg / 75 lb
  • Maximum Penetration – XL and LGP: 360 mm / 14.2 in
  • Maximum Penetration Force – LGP: 45.1 kN / 10138 lb
  • Maximum Penetration Force – XL: 42.2 kN / 9480 lb
  • Maximum Pry-out Force – LGP: 166.7 kN / 37480 lb
  • Maximum Pry-out Force – XL: 166.7 kN / 37480 lb
  • Pocket Spacing: 896 mm / 35.3 in
  • Shank Gauge: 1792 mm / 70.6 in
  • Shank Section: 58.5 × 138 mm (2.3 × 5.4 in)
  • Type Fixed: Parallelogram
  • Weight – With One Shank: 845 kg / 1863 lb
  • Number of Pockets: 3
  • Overall Beam Width: 1951 mm / 76.8 in
  • Beam Cross Section: 165 × 211 mm (6.5 × 8.3 in)

Winch

  • Cable Ferrule Size – Length: 67 mm / 2.63 in
  • Cable Ferrule Size – Outside Diameter: 54 mm / 2.13 in
  • Drum Capacity – Optional Rope: 67 m / 220 ft
  • Drum Capacity – Recommended Rope: 93 m / 306 ft
  • Maximum Bare Drum – Line Pull: 222.4 kN / 50000 lbf
  • Maximum Bare Drum – Line Speed: 38 m/min / 124 ft/min
  • Maximum Full Drum – Line Pull: 115.7 kN / 26000 lbf
  • Maximum Full Drum – Line Speed: 70 m/min / 230 ft/min
  • Optional Cable Size: 22 mm / 0.87 in
  • Rope Recommended Diameter: 19 mm / 0.75 in
  • Winch Case – Width: 740 mm / 29.1 in
  • Winch Drive: Hydrostatic
  • Winch Model: PA50
  • Winch and Bracket Length: 845 mm / 33.2 in
  • Drum Diameter: 205 mm / 8 in
  • Drum Width: 274 mm / 11 in
  • Flange Diameter: 457 mm / 18 in
  • Note: *Weight includes: pump, operator controls, oil, mounting brackets and spacers.
  • Weight*: 907 kg / 2000 lb

Standards

  • FOPS: FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.
  • ROPS: ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
  • Brakes: Brakes meet the standard ISO 10265:2008.

Air Conditioning System

  • Air Conditioning: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.3 kg of refrigerant which has a CO2 equivalent of 1.859 metric tonnes.

Sustainability

  • Engine Emissions: Fully complies with Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 emission standards
  • Vibration Levels (1): The hand/arm vibration of this machine is below 2.5 m/s2, for an experienced operator in a dozing application.
  • Vibration Levels (2): The whole body vibration information is available in Operation and Maintenance Manual SEBU8257.
  • Vibration Levels (3): The whole body vibration information is available in Pocket Guide HEGQ3339 “Driving Down Vibration.”
  • Vibration Levels (4): Operator’s seat meets input “spectral class EM6” according to ISO 7096:2000. Seat has a transmissibility factor of “SEAT<0.7.”

Transmission – Travel Speed

  • Forward: 0-10 km/h (0-6.2 mph)
  • Reverse: 0-10 km/h (0-6.2 mph)
  • Transmission Type: Hydrostatic

Pedir orçamento

Entraremos em contacto com a melhor proposta.

Para enviar, é obrigatório concordar com os termos abaixo:
Concordo com o tratamento dos meus dados, segundo a política de privacidade, de acordo com as boas práticas do Regulamento Geral sobre a Proteção de Dados (GDPR).
Concordo com o compartilhamento dos meus dados com a empresa STET, para que ela possa dar resposta ao meu contacto.