Save money and transport time with one rugged machine for land clearing, digging, grading, truck loading, slope work and more. Crawler loaders give you reduced ground pressure and better traction so you can start the job earlier and work longer in soft underfoot conditions. Purpose-built Waste Handler, Ship Hold and Partial Steel Mill configurations stand up to the toughest applications. This new generation of Cat® Track Loaders brings you all of this, plus improved performance and fuel efficiency.

Informações Tećnicas

• Net Power (Rated) - SAE J1349/ISO 9249: 115 kW
• Operating Weight: 15355 kg
• Capacity - General Purpose: 1.8 m³

Mais informações

Engine

• Flywheel Power: 115 kW / 154 HP
• Engine Model: Cat C7.1
• Net Power (Rated) - SAE J1349/ISO 9249: 115 kW / 154 HP
• Net Power - Rated - ISO 9249 (DIN): 156 HP / 156 HP
• Note (1): All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
• Note (2): Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
• Emissions: U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final or China Nonroad Stage III, India Bharat III, Eurasian Economic Union Stage IIIA, UN ECE R96 Stage IIIA emission standards, equivalent to Tier 3/Stage IIIA

Undercarriage

• Track on Ground: 2320 mm / 91.3 in
• Track Gauge: 1836 mm / 72.3 in
• Ground Contact Area - Optional Shoe: 1.8 m² / 2790 in²
• Ground Contact Area - Standard Shoe: 2.2 m² / 3410 in²
• Ground Pressure(1) - Optional Shoe: 76.7 kPa / 11.1 psi
• Ground Pressure(1) - Standard Shoe: 60.7 kPa / 8.8 psi
• Grouser Height - Double Grouser: 35 mm / 1.4 in
• Track Rollers/Shoes - Each Side: Jun-37
• Track Shoe Width - Optional: 380 mm / 14.9 in
• Track Shoe Width - Standard: 480 mm / 18.9 in
• Ground Pressure - Optional Shoe: 75.3 kPa / 10.9 psi
• Ground Pressure - Standard Shoe: 59.6 kPa / 8.6 psi
• Note: (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.

Service Refill Capacities

• Fuel Tank: 265 l / 70 gal (US)
• DEF Tank(1): 16 l / 4.2 gal (US)
• Note: (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.

Weights

• Operating Weight: 15355 kg / 33852 lb
• Note: (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
• Operating Weight(1): 15642 kg / 34484 lb

Buckets

• Capacity - General Purpose: 1.8 m³ / 2.4 yd³
• Capacity - Multi-Purpose: 1.6 m³ / 2.1 yd³
• Capacity - Performance Series: 2.1 m³ / 2.5 yd³
• Width - General Purpose: 2485 mm / 97.8 in
• Note: Buckets equipped with teeth and segments.
• Width - Multi-Purpose: 2471 mm / 97.3 in
• Width - Performance Series: 2536 mm / 99.8 in

Air Conditioning System

• Air Conditioning: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes.

Dimensions

• Bucket Height - Carry Position: 548 mm / 21.6 in
• Carry Position Approach Angle: 15°
• Clearance at Full Lift Height and 45° Dump*: 2694 mm / 106 in
• Digging Depth*: 140 mm / 5.5 in
• Grading Angle: 74°
• Ground Clearance: 417 mm / 16.4 in
• Height - Bucket Hinge Pin: 3610 mm / 142.1 in
• Height - Top of Stack: 2804 mm / 110.3 in
• Machine Height - Top of Cab: 3155 mm / 124.2 in
• Maximum Rollback - Ground/Carry Position: 43°/50°
• Maximum Rollback/Dump - Fully Raised: 52°/53°
• Note: *With general purpose bucket and extra duty teeth.
• Overall Machine Height - Bucket Fully Raised: 4666 mm / 183.7 in
• Overall Machine Length*: 6389 mm / 251.5 in
• Overall Machine Width without Bucket: Narrow Tracks - 380 mm (14.9 in) Shoes: 2216 mm / 87.2 in
• Overall Machine Width without Bucket: Standard Tracks - 480 mm (19.7 in) Shoes: 2316 mm / 91.2 in
• Ramp Angle: 29°
• Reach at Full Lift Height and 45° Dump*: 1195 mm / 47 in

General

• Note: For complete machine specifications and available configurations, please see your Cat dealer or look on this website.