STET

930M – PÁS CARREGADORAS DE RODAS

  • ColeçãoColeçãoPÁS CARREGADORAS DE RODAS
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel

Descrição

The Cat 930M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.

Informações Tećnicas

  • Rated Net Power: 117 kW
  • Operating Weight: 14235 kg
  • Bucket Capacities: 2.1-5.0 m³ (2.7-6.5 yd³)

Mais informações

Engine

  • Engine Model: Cat C7.1 ACERT**
  • Maximum Rated Gross Power – ISO 14396: 122 kW / 164 HP
  • Maximum Rated Gross Power – ISO 14396 (DIN): 122 kW / 166 HP
  • Maximum Rated Gross Power – ISO 14396 (DIN) (Performance Power Mode: Range 1-4): 122 kW / 166 HP
  • Maximum Rated Gross Power – ISO 14396 (Performance Power Mode: Range 1-4): 122 kW / 164 HP
  • Maximum Rated Gross Power – Maximum Engine Speed (Performance Power Mode: Range 1-4): 1800 r/min / 1800 r/min
  • Rated Net Power: 117 kW / 157 HP
  • Rated Net Power – 1,800 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4): 119 kW / 160 HP
  • Rated Net Power – 1,800 rpm – SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4): 122 kW / 163 HP
  • Maximum Gross Power: 127 kW / 170 HP
  • Bore: 105 mm / 4 in
  • Stroke: 135 mm / 5 in
  • Displacement: 7.01 l / 427 in³
  • Emissions: Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
  • Maximum Gross Torque – ISO 14396 (Performance Power Mode: Range 1-4): 815 N·m / 601 ft·lbf
  • Maximum Gross Torque – ISO 14396 (Standard Power Mode: Range 1-3*): 795 N·m / 586 ft·lbf
  • Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4): 776 N·m / 572 lb/ft
  • Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*): 776 N·m / 572 lb/ft
  • Maximum Net Torque – SAE J1349 (Performance Power Mode: Range 1-4): 797 N·m / 588 ft·lbf
  • Maximum Net Torque – SAE J1349 (Standard Power Mode: Range 1-3*): 777 N·m / 573 ft·lbf
  • Maximum Rated Gross Power – ISO 14396 (DIN) (Standard Power Mode: Range 1-3*): 119 kW / 162 HP
  • Maximum Rated Gross Power – ISO 14396 (Standard Power Mode: Range 1-3*): 119 kW / 160 HP
  • Maximum Rated Gross Power – Maximum Engine Speed (Standard Power Mode: Range 1-3*): 1600 r/min / 1600 r/min
  • Note (1): Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
  • Note (2): *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
  • Note (3): **The Cat C7.1 ACERT engine meets Tier 4 Final/Stage V off-highway emission standards.
  • Note (4): Spark arrestor performance as standard – Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
  • Rated Net Power – 1,600 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 116 kW / 156 HP
  • Rated Net Power – 1,600 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 118 kW / 158 HP
  • Rated Net Power – 1,600 rpm – SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 116 kW / 156 HP
  • Rated Net Power – 1,800 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4): 124 kW / 166 HP
  • Maximum Gross Power – 1,800 rpm – ISO 14396 (DIN) (Performance Power Mode: Range 1-4): 127 kW / 170 HP
  • Maximum Gross Power – 1,800 rpm – ISO 14396 (Performance Power Mode: Range 1-4): 125 kW / 168 HP
  • Displacement (Performance Power Mode: Speed Range 1-4): 7.01 l / 427 in³
  • Maximum Gross Power – 1,600 rpm – ISO 14396 (Standard Power Mode: Range 1-3*): 119 kW / 160 HP
  • Displacement (Standard Power Mode: Speed Range 1-3*): 7.01 l / 427 in³
  • Maximum Gross Power – 1,600 rpm – ISO 14396 (DIN) (Standard Power Mode: Range 1-3*): 121 kW / 162 HP
  • Maximum Net Torque – ISO 9249:2007 (Performance Power Mode: Range 1-4): 796 N·m / 587 ft·lbf
  • Rated Net Power – 1,800 rpm – ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4): 122 kW / 164 HP
  • Maximum Net Torque – ISO 9249:2007 (Standard Power Mode: Range 1-3*): 776 N·m / 572 ft·lbf
  • Rated Net Power – 1,600 rpm – ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 116 kW / 156 HP

Buckets

  • Bucket Capacities: 2.1-5.0 m³ (2.7-6.5 yd³)
  • Bucket Capacities – Light Material: 3.1-5.0 m³ (4.0-6.5 yd³)
  • Bucket Capacities – General Purpose: 2.1-2.7 m³ (2.7-3.5 yd³)

Weights

  • Operating Weight: 14235 kg / 31382 lb

Cab

  • ROPS: ISO 3471:2008
  • FOPS: ISO 3449:2005 Level II
  • Note (1): Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
  • Note (2): The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are:– Standard cab: 68 ±3 dB(A)– Deluxe cab: 66 ±2 dB(A)
  • Note (3): *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Air Conditioning System

  • Air Conditioning: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Loader Hydraulic System

  • Cycle Times – Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Dump (at Maximum Lift Height): 1.5/1.7 seconds
  • Cycle Times – Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Float Down (Maximum Lift to Ground Level): 2.7/2.7 seconds
  • Cycle Times – Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Raise (Ground Level to Maximum Lift): 5.1/5.7 seconds
  • Cycle Times – Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Total Cycle Time: 9.3/10.1 seconds
  • Lift Cylinder, Double Acting – Bore Diameter: 120 mm / 4.7 in
  • Lift Cylinder, Double Acting – Rod Diameter: 65 mm / 2.6 in
  • Lift Cylinder, Double Acting – Stroke: 728 mm / 28.7 in
  • Maximum Flow – Implement Pump: 190 l/min / 50 gal/min
  • Maximum Flow – Implement Pump – 3rd Function*: 190 l/min / 50 gal/min
  • Maximum Flow – Implement Pump – 4th Function Maximum Flow*: 160 l/min / 42 gal/min
  • Maximum Working Pressure – Implement Pump: 26000 kPa / 3771 psi
  • Note (1): *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
  • Note (2): Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
  • Note (3): Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
  • Relief Pressure – Tilt Cylinder: 28000 kPa / 4061 psi
  • Relief Pressure – Tilt Cylinder – 3rd and 4th Function Maximum Working Pressure: 26000 kPa / 3771 psi
  • Relief Pressure – Tilt Cylinder – 3rd and 4th Function Relief Pressure: 28000 kPa / 4061 psi
  • Tilt Cylinder, Double Acting – Bore Diameter: 150 mm / 5.9 in
  • Tilt Cylinder, Double Acting – Rod Diameter: 90 mm / 3.5 in
  • Tilt Cylinder, Double Acting – Stroke: 555 mm / 21.9 in
  • Hydraulic Cycle Time – Standard Mode at 1,600 rpm – Float Down, Maximum Lift to Ground Level: 2.7 s / 2.7 s
  • Hydraulic Cycle Time – Standard Mode at 1,600 rpm – Raise, Ground Level to Maximum Lift: 5.7 s / 5.7 s
  • Hydraulic Cycle Time – Performance Mode at 1,800 rpm – Dump, at Maximum Lift Height: 1.5 s / 1.5 s
  • Hydraulic Cycle Time – Performance Mode at 1,800 rpm – Raise, Ground Level to Maximum Lift: 5.1 s / 5.1 s
  • Hydraulic Cycle Time – Performance Mode at 1,800 rpm – Float Down, Maximum Lift to Ground Level: 2.7 s / 2.7 s
  • Hydraulic Cycle Time – Standard Mode at 1,600 rpm – Total Cycle Time: 10.1 s / 10.1 s
  • Hydraulic Cycle Time – Standard Mode at 1,600 rpm – Dump, at Maximum Lift Height: 1.7 s / 1.7 s
  • Hydraulic Cycle Time – Performance Mode at 1,800 rpm – Total Cycle Time: 9.3 s / 9.3 s
  • Maximum Flow – Implement Pump – 3rd Function Maximum Flow*: 190 l/min / 50 gal/min

Operating Specifications

  • Full Turn Tip Load: 8469 kg / 18670 lb

Power Train

  • Brakes – Parking: Spring applied hydraulically released
  • Brakes – Service: Inboard wet disc
  • Front Axle: Fixed
  • Front Axle – Traction Aid – Standard: Locking differential
  • Note (1): Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
  • Note (2): Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
  • Rear Axle: Oscillating
  • Rear Axle – Oscillation Angle by Tire Size – 20.5 R25, 550/65, 600/65, 650/65: ± 10.5 degrees
  • Rear Axle – Oscillation Angle by Tire Size – Solid Tires, 750/65, 620/65, Skidder: ± 7 degrees
  • Rear Axle – Traction Aid – Optional: Limited slip differential

Service Refill Capacities

  • Cooling System: 30 l / 7.9 gal (US)
  • Diesel Exhaust Fluid (DEF) Tank: 19 l / 5 gal (US)
  • Engine Crankcase: 20 l / 5.3 gal (US)
  • Front Axles: 26 l / 6.9 gal (US)
  • Fuel Tank: 195 l / 51.5 gal (US)
  • Hydraulic System – Including Tank: 165 l / 43.6 gal (US)
  • Hydraulic Tank: 90 l / 23.8 gal (US)
  • Rear Axles: 25 l / 6.6 gal (US)
  • Transmission – Gear Box: 8.5 l / 2.2 gal (US)
  • Note: DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Steering

  • Maximum Flow – Steering Pump: 130 l/min / 34 gal/min
  • Maximum Steering Torque – 0° (Straight Machine): 50375 N·m / 37155 ft·lbf
  • Maximum Steering Torque – 40° (Full Turn): 37620 N·m / 27747 ft·lbf
  • Maximum Working Pressure – Steering Pump: 24130 kPa / 3500 psi
  • Note (1): Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
  • Note (2): Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
  • Steering Cycle Times – Full Left to Full Right – Maximum RPM: 90 rpm Steering Wheel Speed: 2.4 s / 2.4 s
  • Steering Cycle Times – Full Left to Full Right – Minimum RPM: Pump Flow Limited: 2.8 s / 2.8 s
  • Steering Cylinder, Double Acting – Bore Diameter: 70 mm / 2.8 in
  • Steering Cylinder, Double Acting – Rod Diameter: 40 mm / 1.6 in
  • Steering Cylinder, Double Acting – Stroke: 438 mm / 17.2 in
  • Steering Cycle Times – Full Left to Full Right – At 1,800 rpm: 90 rpm Steering Wheel Speed: 2.4 s / 2.4 s
  • Number of Steering Wheel Turns – Full Left to Full Right or Full Right to Full Left: 3.5 turns / 3.5 turns
  • Steering Articulation Angle – Each Direction: 40°

Transmission

  • Forward and Reverse – Range 1*: 1-13 km/h (0.6-8 mph)
  • Forward and Reverse – Range 2: 13 km/h / 8 mile/h
  • Forward and Reverse – Range 3: 27 km/h / 17 mile/h
  • Forward and Reverse – Range 4: 40 km/h / 25 mile/h
  • Note: *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).

Sound

  • Note (1): European Union Directive “2000/14/EC”
  • Operator Sound Pressure (ISO 6396:2008): 72 dB(A) / 72 dB(A)
  • Average Exterior Sound Pressure (ISO 6395:2008): 101 dB(A) / 101 dB(A)

Axles

  • Rear: Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
  • Front: Fixed; Locking differential (standard)

Tires

  • Note (3): Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
  • Note (1): Other tire choices are available. Contact your Cat dealer for details.
  • Note (2): In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
  • Other Choices Include: 20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 600/65 R25 radial (L-3); Skidder/Agriculture; Solid Tires
  • Standard Size: 20.5 R25, radial (L-3)

Pedir orçamento

Entraremos em contacto com a melhor proposta.

Para enviar, é obrigatório concordar com os termos abaixo:
Concordo com o tratamento dos meus dados, segundo a política de privacidade, de acordo com as boas práticas do Regulamento Geral sobre a Proteção de Dados (GDPR).
Concordo com o compartilhamento dos meus dados com a empresa STET, para que ela possa dar resposta ao meu contacto.