facebook_pixel926M - PÁS CARREGADORAS DE RODAS | Projectista
STET

926M - PÁS CARREGADORAS DE RODAS

  • ColeçãoColeçãoPÁS CARREGADORAS DE RODAS
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel

Descrição

The Cat 926M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.

Informações Tećnicas

  • Rated Net Power: 110 kW
  • Operating Weight: 12944 kg
  • Bucket Capacities: 1.9-5.0 m³ (2.5-6.5 yd³)

Mais informações

Engine

  • Engine Model: Cat C7.1 ACERT**
  • Maximum Rated Gross Power - ISO 14396: 114 kW / 153 HP
  • Maximum Rated Gross Power - ISO 14396 (DIN): 114 kW / 155 HP
  • Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4): 114 kW / 155 HP
  • Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4): 114 kW / 153 HP
  • Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4): 1800 r/min / 1800 r/min
  • Rated Net Power: 110 kW / 148 HP
  • Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4): 111 kW / 149 HP
  • Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4): 110 kW / 148 HP
  • Maximum Gross Power: 116 kW / 155 HP
  • Bore: 105 mm / 4 in
  • Stroke: 135 mm / 5 in
  • Displacement: 7.01 l / 427 in³
  • Emissions: Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
  • Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4): 721 N·m / 531 ft·lbf
  • Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*): 721 N·m / 531 ft·lbf
  • Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4): 702 N·m / 517 lb/ft
  • Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*): 702 N·m / 517 lb/ft
  • Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4): 694 N·m / 511 ft·lbf
  • Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*): 694 N·m / 511 ft·lbf
  • Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*): 109 kW / 148 HP
  • Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*): 109 kW / 146 HP
  • Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*): 1600 r/min / 1600 r/min
  • Note (1): Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
  • Note (2): No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
  • Note (3): *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
  • Note (4): **The Cat C7.1 ACERT engine meets Tier 4 Final/Stage V off-highway emission standards.
  • Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 106 kW / 142 HP
  • Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 107 kW / 144 HP
  • Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 105 kW / 141 HP
  • Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4): 113 kW / 151 HP
  • Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*): 110 kW / 148 HP
  • Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4): 114 kW / 153 HP
  • Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4): 116 kW / 155 HP
  • Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*): 109 kW / 146 HP
  • Displacement (Performance Power Mode: Speed Range 1-4): 7.01 l / 427 in³
  • Displacement (Standard Power Mode: Speed Range 1-3*): 7.01 l / 427 in³
  • Rated Net Power - 1,800 rpm - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4): 111 kW / 149 HP
  • Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4): 702 N·m / 517 ft·lbf
  • Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*): 702 N·m / 517 ft·lbf
  • Rated Net Power - 1,600 rpm - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 106 kW / 142 HP

Buckets

  • Bucket Capacities: 1.9-5.0 m³ (2.5-6.5 yd³)
  • Bucket Capacities - General Purpose: 1.9-2.5 m³ (2.5-3.2 yd³)
  • Bucket Capacities - Light Material: 3.1-5.0 m³ (4.0-6.5 yd³)

Weights

  • Operating Weight: 12944 kg / 28535 lb

Cab

  • ROPS: ISO 3471:2008
  • FOPS: ISO 3449:2005 Level II
  • Note (1): Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
  • Note (2): The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are:– Standard cab: 68 ±3 dB(A)– Deluxe cab: 66 ±2 dB(A)
  • Note (3): *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Air Conditioning System

  • Air Conditioning: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Loader Hydraulic System

  • Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height): 1.5/1.7 seconds
  • Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level): 2.6/2.6 seconds
  • Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift): 5.5/6.2 seconds
  • Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time: 9.6/10.5 seconds
  • Lift Cylinder, Double Acting - Bore Diameter: 110 mm / 4.3 in
  • Lift Cylinder, Double Acting - Rod Diameter: 60 mm / 2.4 in
  • Lift Cylinder, Double Acting - Stroke: 728 mm / 28.7 in
  • Maximum Flow - Implement Pump: 150 l/min / 40 gal/min
  • Maximum Flow - Implement Pump - 3rd Function*: 150 l/min / 40 gal/min
  • Maximum Flow - Implement Pump - 4th Function Maximum Flow*: 150 l/min / 40 gal/min
  • Maximum Working Pressure - Implement Pump: 26000 kPa / 3771 psi
  • Note (1): *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
  • Note (2): Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
  • Note (3): Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
  • Relief Pressure - Tilt Cylinder: 28000 kPa / 4061 psi
  • Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure: 26000 kPa / 3771 psi
  • Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure: 28000 kPa / 4061 psi
  • Tilt Cylinder, Double Acting - Bore Diameter: 130 mm / 5.1 in
  • Tilt Cylinder, Double Acting - Rod Diameter: 70 mm / 2.8 in
  • Tilt Cylinder, Double Acting - Stroke: 555 mm / 21.9 in
  • Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time: 10.5 s / 10.5 s
  • Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time: 9.5 s / 9.5 s
  • Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level: 2.6 s / 2.6 s
  • Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level: 2.6 s / 2.6 s
  • Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift: 6.2 s / 6.2 s
  • Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height: 1.7 s / 1.7 s
  • Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height: 1.5 s / 1.5 s
  • Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift: 5.5 s / 5.5 s
  • Maximum Flow - Implement Pump - 3rd Function Maximum Flow*: 150 l/min / 40 gal/min

Operating Specifications

  • Full Turn Tip Load: 7524 kg / 16587 lb

Power Train

  • Brakes - Parking: Spring applied hydraulically released
  • Brakes - Service: Inboard wet disc
  • Front Axle: Fixed
  • Front Axle - Traction Aid - Standard: Locking differential
  • Note (1): Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
  • Note (2): Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
  • Rear Axle: Oscillating
  • Rear Axle - Oscillation Angle by Tire Size - 17.5 R25: ± 13.5 degrees
  • Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65: ± 10.5 degrees
  • Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder: ± 7 degrees
  • Rear Axle - Traction Aid - Optional: Limited slip differential

Service Refill Capacities

  • Cooling System: 30 l / 7.9 gal (US)
  • Diesel Exhaust Fluid (DEF) Tank: 19 l / 5 gal (US)
  • Engine Crankcase: 20 l / 5.3 gal (US)
  • Front Axles: 21 l / 5.5 gal (US)
  • Fuel Tank: 195 l / 51.5 gal (US)
  • Hydraulic System - Including Tank: 160 l / 42.3 gal (US)
  • Hydraulic Tank: 90 l / 23.8 gal (US)
  • Rear Axles: 21 l / 5.5 gal (US)
  • Transmission - Gear Box: 8.5 l / 2.2 gal (US)
  • Note: DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Steering

  • Maximum Flow - Steering Pump: 130 l/min / 34 gal/min
  • Maximum Steering Torque - 0° (Straight Machine): 50375 N·m / 37155 ft·lbf
  • Maximum Steering Torque - 40° (Full Turn): 37620 N·m / 27747 ft·lbf
  • Maximum Working Pressure - Steering Pump: 24130 kPa / 3500 psi
  • Note (1): Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
  • Note (2): Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
  • Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed: 2.4 s / 2.4 s
  • Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited: 2.8 s / 2.8 s
  • Steering Cylinder, Double Acting - Bore Diameter: 70 mm / 2.8 in
  • Steering Cylinder, Double Acting - Rod Diameter: 40 mm / 1.6 in
  • Steering Cylinder, Double Acting - Stroke: 438 mm / 17.2 in
  • Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed: 2.4 s / 2.4 s
  • Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left: 3.5 turns / 3.5 turns
  • Steering Articulation Angle - Each Direction: 40°

Transmission

  • Forward and Reverse - Range 1*: 1-13 km/h (0.6-8 mph)
  • Forward and Reverse - Range 2: 13 km/h / 8 mile/h
  • Forward and Reverse - Range 3: 27 km/h / 17 mile/h
  • Forward and Reverse - Range 4: 40 km/h / 25 mile/h
  • Note: *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).

Sound

  • Note (1): European Union Directive “2000/14/EC.”
  • Average Exterior Sound Pressure (ISO 6395:2008): 101 dB(A) / 101 dB(A)
  • Operator Sound Pressure (ISO 6396:2008): 72 dB(A) / 72 dB(A)

Axles

  • Front: Fixed; Locking differential (standard)
  • Rear: Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

Tires

  • Note (1): Other tire choices are available. Contact your Cat dealer for details.
  • Other Choices Include: 20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 17.5 R25, radial (L-2); 17.5 R25, radial (L-3); 17.5 R25, radial (L-5); 550/65 R25 radial (L-3); Skidder/Agriculture
  • Note (2): In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
  • Note (3): Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
  • Standard Size: 20.5 R25, radial (L-3)

Pedir orçamento

Entraremos em contacto com a melhor proposta.

Para enviar, é obrigatório concordar com os termos abaixo:
Concordo com o tratamento dos meus dados, segundo a política de privacidade, de acordo com as boas práticas do Regulamento Geral sobre a Proteção de Dados (GDPR).
Concordo com a partilha dos meus dados com a empresa STET, para que ela possa dar resposta ao meu contacto.