The Cat® 914M Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a toolcarrier.

Informações Tećnicas

• Net Power: 72 kW
• Operating Weight: 8761 kg
• Bucket Capacities: 1.3-1.9 m3 (1.7-2.5 yd3)

Mais informações

Engine

• Net Power: 72 kW / 97 HP
• Engine Model: Cat C4.4 ACERT�
• Maximum Gross Power - ISO 14396: 74 kW / 100 HP
• Maximum Gross Power - ISO 14396 (DIN): 74 kW / 101 HP
• Maximum Gross Power - Maximum Engine Speed: 2350 r/min / 2350 r/min
• Maximum Gross Power - SAE J1995: 76 kW / 102 HP
• Rated Net Power - Rated Engine Speed: 2200 r/min / 2200 r/min
• Rated Net Power - SAE J1349: 72 kW / 96 HP
• Maximum Gross Power: 74 kW / 100 HP
• Bore: 105 mm / 4.13 in
• Displacement: 4.4 l / 268 in³
• Emissions: Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
• Maximum Gross Torque - ISO 14396: 450 N·m / 332 ft·lbf
• Maximum Gross Torque - SAE J1995: 455 N·m / 336 ft·lbf
• Maximum Net Torque - ISO 9249: 446 N·m / 329 ft·lbf
• Maximum Net Torque - SAE J1349: 441 N·m / 325 ft·lbf
• Note: Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
• Rated Net Power - ISO 9249: 72 kW / 97 HP
• Rated Net Power - ISO 9249 (DIN): 72 kW / 98 HP
• Stroke: 127 mm / 5 in

Weights

• Operating Weight: 8761 kg / 19315 lb

Service Refill Capacities

• Cooling System: 21.5 l / 5.7 gal (US)
• Fuel Tank: 154 l / 40.7 gal (US)
• Engine Crankcase: 8.8 l / 2.3 gal (US)
• Hydraulic System - Including Tank: 98 l / 25.9 gal (US)
• Axles - Front Center Differential: 7.5 l / 2 gal (US)
• Axles - Rear Center Differential: 7.5 l / 2 gal (US)
• Diesel Exhaust Fluid (DEF) Tank: 18.9 l / 5 gal (US)
• Hydraulic Tank: 55 l / 14.5 gal (US)
• Note: DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
• Transmission: 3.4 l / 0.9 gal (US)

Operating Specifications

• Rated Bucket Capacity: 1.9 m³ / 2.5 yd³

Buckets

• Bucket Capacities: 1.3-1.9 m3 (1.7-2.5 yd3)

Cab

• ROPS: ISO 3471:2008
• FOPS: ISO 3449:2005 Level II
• Note (1): Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
• Note (2): The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
• Note (3): The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
• Note (4): *The measurements were conducted with the cab doors and windows closed.

Axles

• Front: Fixed; Locking differential (standard)
• Rear: Oscillating �11 degrees; Locking differential (Standard)

Loader Hydraulic System

• Hydraulic Cycle Time - Dump, at Maximum Reach: 1.4 s / 1.4 s
• Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level: 3.7 s / 3.7 s
• Hydraulic Cycle Time - Rackback: 2.2 s / 2.2 s
• Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift: 5.2 s / 5.2 s
• Hydraulic Cycle Time - Total Cycle Time: 12.5 s / 12.5 s
• Maximum Flow - Implement Pump: 148 l/min / 39 gal/min
• Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High: 120 l/min / 32 gal/min
• Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard: 90 l/min / 24 gal/min
• Maximum Flow - Implement Pump - 4th Function, Maximum Flow: 90 l/min / 24 gal/min
• Maximum Working Pressure - Implement Pump: 28000 kPa / 4061 psi
• Relief Pressure - Tilt Cylinder: 34000 kPa / 4931 psi
• Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure: 21000 kPa / 3046 psi
• Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure: 21000 kPa / 3046 psi

Steering

• Maximum Flow - Steering Pump: 82 l/min / 22 gal/min
• Maximum Working Pressure - Steering Pump: 22500 kPa / 3263 psi
• Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left: 3.75 turns / 3.75 turns
• Steering Articulation Angle - Each Direction: 40 ° / 40 °
• Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed: 2.8 s / 2.8 s

Tires

• Note (1): Other tire choices are available. Contact your Cat dealer for details.
• Note (2): In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
• Note (3): Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
• Other Choices Include: 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
• Standard Size: 17.5-25 12PR

Transmission

• Forward and Reverse - High Range: 40 km/h / 25 mile/h
• Forward and Reverse - Low Range, Speed Range 1*: 10 km/h / 6.3 mile/h
• Forward and Reverse - Low Range, Speed Range 2*: 20 km/h / 12.5 mile/h
• Note: *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Engine - Tier 4 Final/Stage IV

• Maximum Net Torque - ISO 9249: 446 N·m / 329 ft·lbf
• Maximum Net Torque - SAE J1349: 441 N·m / 325 ft·lbf