The Cat® 907M Compact Wheel Loader delivers high performance with outstanding versatility. On-the-go operator tuned hydraulics and drive train adjust the machine's response to the task at hand. Low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long.

Informações Tećnicas

• Net Power: 55.3 kW
• Operating Weight: 5750 kg
• Bucket Capacities: 0.75 m³-1.5 m³ (1.0 yd³-2.0 yd³)

Mais informações

Engine

• Note (6): Stage V engine available for Europe only.
• Note (7): Tier 4 Final engine will be offered for North America and Japan.
• Note (8): Tier 4 Final machines will not be offered or sold into Europe.
• Net Power: 55.3 kW / 74 HP
• Emissions: *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage V (Europe only) or U.S. EPA Tier 4 Final (North America only) emission standards.
• Engine Model: Cat® C3.3B DIT*
• Maximum Gross Power - ISO 14396: 54.6 kW / 73 HP
• Maximum Gross Power - ISO 14396 (DIN): 55 kW / 74 HP
• Maximum Gross Power - SAE J1995: 55 kW / 74 HP
• Rated Net Power - 2,400 rpm - ISO 9249 (1977)/EEC 80/1269: 55.3 kW / 74 HP
• Rated Net Power - 2,400 rpm - SAE J1349: 54.7 kW / 73 HP
• Maximum Gross Power: 54.6 kW / 73 HP
• Bore: 94 mm / 3.7 in
• Displacement: 3.3 l / 201 in³
• Maximum Gross Torque - ISO 14396: 261 N·m / 192 ft·lbf
• Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269: 260 N·m / 191 ft·lbf
• Maximum Net Torque - SAE J1349: 257 N·m / 189 ft·lbf
• Note (1): Net power ratings are tested at the reference conditions for the specified standard.
• Note (2): Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.
• Note (3): No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
• Note (4): Flywheel per the SAE reference conditions with the fan at maximum speed.
• Note (5): The Cat C3.3B DIT Tier 4 Final/Stage V uses an active regeneration system which requires no operator interaction under normal conditions.
• Stroke: 120 mm / 4.7 in
• Maximum Gross Power - DIN ISO 14396: 55 kW / 74 HP

Weights

• Operating Weight: 5750 kg / 12677 lb
• Note: Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 907M is configured with a 1.0 m³ (1.31 yd³) bucket with bolt-on cutting edge.

Service Refill Capacities

• Cooling System: 16.5 l / 4.5 gal (US)
• Engine Crankcase: 11.2 l / 3 gal (US)
• Fuel Tank: 78 l / 20.6 gal (US)
• Hydraulic System - Including Tank: 70 l / 18.5 gal (US)
• Axles - Front: N/A
• Axles - Rear: N/A
• Hydraulic Tank: 46 l / 12.2 gal (US)
• Transmission - Gear Box: 8.5 l / 2.2 gal (US)

Operating Specifications

• Rated Bucket Capacity: 1 m³ / 1.31 yd³
• Clearance - Full Lift and 45° Dump: 2429 mm / 7.97 ft
• Full Turn Tipping Load: 3500 kg / 7716 lb
• Reach - Full Lift and 45° Dump: 792 mm / 2.6 ft
• Steering Articulation Angle - Each Direction: 39°
• Tipping Load - Full Turn - ISO 14397-1: 3330 kg / 7339 lb
• Tipping Load - Straight - ISO 14397-1: 4087 kg / 9007 lb

Loader Hydraulic System

• 3rd Function Maximum Working Pressure: 23500 kPa / 3408 psi
• Maximum Flow - Implement Pump: 73 l/min / 19 gal/min
• Maximum Flow - Implement Pump - Auxiliary Function High Flow: 116 l/min / 31 gal/min
• Maximum Flow - Implement Pump - Auxiliary Function Standard Flow: 73 l/min / 19 gal/min
• Maximum Working Pressure - Implement Pump: 23500 kPa / 3408 psi
• Relief Pressure - Tilt Cylinder Head: 31000 kPa / 4496 psi
• Relief Pressure - Tilt Cylinder Rod: 19000 kPa / 2756 psi
• Boost Flow Maximum Pressure: 22000 kPa / 3191 psi
• Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height: 3 s / 3 s
• Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level: 2.6 s / 2.6 s
• Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift: 9.6 s / 9.6 s
• Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height: 1.5 s / 1.5 s
• Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level: 2.6 s / 2.6 s
• Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift: 5.5 s / 5.5 s
• Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time: 9.6 s / 9.6 s
• Lift Cylinder, Double Acting - Bore Diameter: 75 mm / 3 in
• Lift Cylinder, Double Acting - Rod Diameter: 50 mm / 2 in
• Lift Cylinder, Double Acting - Stroke: 695 mm / 27.4 in
• Tilt Cylinder, Double Acting - Bore Diameter: 90 mm / 3.5 in
• Tilt Cylinder, Double Acting - Rod Diameter: 55 mm / 2.2 in
• Tilt Cylinder, Double Acting - Stroke: 417 mm / 16.4 in

Dimensions with Bucket (Approximate) - Standard Lift - With ISO Coupler

• Articulation Angle: 39°
• Clearance - Bucket at 45° *: 2478 mm / 8.08 ft
• Clearance - Level Bucket**: 3027 mm / 9.92 ft
• Departure Angle: 33°
• Dig Depth**: 95 mm / 3.7 in
• Dump Angle at Full Lift: 45°
• Height - Bucket Pin**: 3227 mm / 10.58 ft
• Height - Ground Clearance**: 300 mm / 11 in
• Height - Ground to Cab**: 2586 mm / 8.42 ft
• Length - Overall*: 5469 mm / 17.92 ft
• Length - Wheel Base: 2170 mm / 7.08 ft
• Machine Width: 1840 mm / 6 ft
• Note (1): *Vary with bucket.
• Note (2): **Vary with tire.
• Note (3): Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
• Operating Weight: 5859 kg / 12913 lb
• Reach - Bucket at 45°*: 725 mm / 2.33 ft
• Turning Radius - Inside of Tires: 2240 mm / 7.33 ft
• Turning Radius - Over Bucket: 4489 mm / 14.67 ft
• Width - Bucket: 2045 mm / 6.67 ft
• Width - Tread Center: 1420 mm / 4.58 ft

Dimensions with Bucket (Approximate) - Standard Lift - With SSL Coupler

• Articulation Angle: 39°
• Clearance - Bucket at 45° *: 2359 mm / 7.67 ft
• Clearance - Level Bucket**: 3035 mm / 9.92 ft
• Departure Angle: 33°
• Dig Depth**: 107 mm / 4.2 in
• Dump Angle at Full Lift: 45°
• Height - Bucket Pin**: 3227 mm / 10.58 ft
• Height - Ground Clearance**: 300 mm / 11 in
• Height - Ground to Cab**: 2586 mm / 8.42 ft
• Length - Overall*: 5620 mm / 18.42 ft
• Length - Wheel Base: 2170 mm / 7.08 ft
• Machine Width: 1840 mm / 6 ft
• Note (1): *Vary with bucket.
• Note (2): **Vary with tire.
• Note (3): Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
• Operating Weight: 5859 kg / 12913 lb
• Reach - Bucket at 45°*: 820 mm / 2.67 ft
• Turning Radius - Inside of Tires: 2240 mm / 7.33 ft
• Turning Radius - Over Bucket: 4473 mm / 14.67 ft
• Width - Bucket: 2045 mm / 6.67 ft
• Width - Tread Center: 1420 mm / 4.58 ft

Buckets

• Bucket Capacities: 0.75 m³-1.5 m³ (1.0 yd³-2.0 yd³)
• General Purpose: 0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³)
• Light Material: 1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³)
• Grapple: 0.9 m³ (1.2 yd³) heaped
• Multi-Purpose: 0.75 m³ (1.0 yd³), 0.9 m³ (1.2 yd³), 1.05 m³ (1.37 yd³)
• Note: All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.

Cab

• ROPS: SAE J1040 MAY94, ISO 3471-1994.
• FOPS: SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
• Note (1): Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
• Note (2): When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A) typical.

Drive Train

• Forward - High Range: 35 km/h / 22 mile/h
• Forward - Range 1: 10 km/h / 6 mile/h
• Forward - Range 2: 20 km/h / 12 mile/h
• Reverse - High Range: 35 km/h / 22 mile/h
• Reverse - Range 1: 10 km/h / 6 mile/h
• Reverse - Range 2: 20 km/h / 12 mile/h

Steering

• Maximum Steering Torque - 0° (Straight Machine): 50375 N·m / 37155 ft·lbf
• Maximum Steering Torque - 39° (Full Turn): 37620 N·m / 27747 ft·lbf
• Maximum Working Pressure - Steering Pump: 22000 kPa / 3191 psi
• Nominal Flow - Steering Pump: 43.9 l/min / 12 gal/min
• Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left: <6 turns
• Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm: 3 s / 3 s
• Steering Articulation Angle - Each Direction: 39°
• Steering Cylinder, Double Acting - Bore Diameter: 80 mm / 3.1 in
• Steering Cylinder, Double Acting - Rod Diameter: 35 mm / 1.4 in
• Steering Cylinder, Double Acting - Stroke: 300 mm / 11.8 in

Tires

• Note (1): *Standard tire.
• Note (2): Other tire choices available, contact your Cat dealer for details.
• Note (3): In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.
• Note (4): Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
• Option (1): 335/80 R18 XZSL Michelin
• Option (2): 340/80 R18 AT-R Firestone
• Option (3): 340/80 R18 XMCL Michelin
• Option (4): 340/80 R18 TRI2 Nokian
• Option (5): 340/80 R18 Bibload Michelin
• Option (6): 405/70 R18 SPT9 Dunlop*
• Option (7): 12.5/80 R18 Flexport™

Engine - Tier 4 Final/Stage IV

• Maximum Net Torque - SAE J1349: 257 N·m / 189 ft·lbf