STET
777G (Tier 4 Equivalent) - CAMIÕES RÍGIDOS
- ColeçãoCAMIÕES RÍGIDOS
Descrição
A série G representa uma nova era para esta classe da Caterpillar. Com sua contribuição, projetámos e fabricámos um camião que é confiável, económico, oferecendo conforto e maior controlo para os operadores. O seu sucesso a longo prazo é o nosso objetivo e com os camiões da Série G, estamos no caminho certo.
Informações Tećnicas
- Gross Power - SAE J1995: 765 kW
- Nominal Payload Class (100%): 90.8 t
- Top Speed - Loaded: 67.1 km/h
Mais informações
Engine
- Engine Model: Cat® C32 ACERT™
- Gross Power - SAE J1995: 765 kW / 1025 HP
- Net Power - SAE J1349: 704 kW / 945 HP
- Net Power - 80/1269/EEC: 704 kW / 945 HP
- Net Power - ISO 9249: 704 kW / 945 HP
- Bore: 146 mm / 5.7 in
- Stroke: 162 mm / 6.4 in
- Displacement: 32.1 l / 1959 in³
- Cylinders: 12
- Engine Power - ISO 14396: 755 kW / 1012 HP
- Engine Speed: 1800 r/min / 1800 r/min
- Net Torque: 5286 N·m / 3899 ft-lb
- Peak Torque - Speed: 1200 r/min / 1200 r/min
- Net Power: 683 kW / 916 HP
- Peak Torque Speed:
- Peak Torque:
- Note (1): Power rating applies at 1,800 rpm when tested under the specified condition for the specified standard.
- Note (2): Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
- Note (3): No engine derating required up to 4600 m (15,000 ft) for Tier 2 Equivalent.
Weights - Approximate
- Target Gross Machine Weight: 164654 kg / 363000 lb
- Operating Weight - Loaded:
Operating Specifications
- Nominal Payload Class (100%): 90.8 t / 100 ton (US)
- Top Speed - Loaded: 67.1 km/h / 41.7 mile/h
- Body Capacity - SAE 2:1: 64.1 m³ / 83.8 yd³
- Maximum Payload (110%): 108.2 ton (US) / 108.2 ton (US)
- Nominal Payload (100%): 98.4 ton (US) / 98.4 ton (US)
- Not to Exceed Payload (120%)*: 118.1 ton (US) / 118.1 ton (US)
- Turning Circle - Clearance Diameter:
- Turning Diameter - Front:
- Target Payload (100%): 90.8 t / 100 ton (US)
- Maximum Allowable Payload (120%)*: 109 t / 120 ton (US)
- Maximum Working Payload (110%): 99.8 t / 110 ton (US)
- Note (1): Capacity with flat floor X Body with liner.
- Note (2): Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross vehicle weight limitations.
Transmission
- Forward - 1: 10.9 km/h / 6.8 mile/h
- Forward - 2: 14.8 km/h / 9.2 mile/h
- Forward - 3: 20.1 km/h / 12.5 mile/h
- Forward - 4: 27.2 km/h / 16.9 mile/h
- Forward - 5: 36.9 km/h / 22.9 mile/h
- Forward - 6: 49.4 km/h / 30.7 mile/h
- Forward - 7: 67.1 km/h / 41.7 mile/h
- Reverse: 12.4 km/h / 7.7 mile/h
- Reverse - 1:
- Note: Maximum travel speeds with standard 27.00R49 (E4) tires.
Final Drives
- Differential Ratio: 2.736:1
- Planetary Ratio: 7.0:1
- Total Reduction Ratio: 19.1576:1
Brakes
- Brake Standards: ISO 3450-2011
- Brake Surface Area - Front: 40846 cm² / 6331 in²
- Brake Surface Area - Rear: 102116 cm² / 15828 in²
- Brake Surface - Front:
- Brake Surface - Rear:
Body Hoists
- Pump Flow - High Idle: 458 l/min / 120.9 gal/min
- Relief Valve Setting - Raise: 18950 kPa / 2750 psi
- Relief Valve Setting - Lower: 3450 kPa / 500 psi
- Body Raise Time - High Idle: 15 s / 15 s
- Body Lower Time - Float: 13 s / 13 s
- Body Lower Time - High Idle: 13 s / 13 s
Capacity - Dual Slope - 100% Fill Factor
- Struck: 41.9 m³ / 54.8 yd³
- Heaped 2:1 (SAE): 60.2 m³ / 78.8 yd³
- Heaped (SAE 2:1)*: 60.2 m³ / 78.8 yd³
- Note (1): Contact your local Cat dealer for body recommendation.
- Note (2): *ISO 6483:1980
Weight Distributions - Approximate
- Front Axle - Empty: 46 % / 46 %
- Front Axle - Loaded: 33 % / 33 %
- Rear Axle - Empty: 54 % / 54 %
- Rear Axle - Loaded: 67 % / 67 %
Suspension
- Rear axle - Oscillation: 5.4 ° / 5.4 °
- Empty Loaded Cylinder Stroke Front: 74.7 mm / 2.9 in
- Empty Loaded Cylinder Stroke Rear: 66 mm / 2.5 in
- Effective Cylinder Stroke - Rear:
Service Refill Capacities
- Fuel Tank (1): 1136 l / 300 gal (US)
- Cooling System: 228 l / 60.2 gal (US)
- Steering System - Including Tank: 53.6 l / 14.1 gal (US)
- Brake Hoist System: 322 l / 85 gal (US)
- Brake Hoist System - Includes Tank: 444 l / 117 gal (US)
- Crankcase: 109 l / 28.7 gal (US)
- Differentials: 227 l / 59.9 gal (US)
- Final Drive - Each: 76 l / 20 gal (US)
- Fuel Tank (2): 1325 l / 350 gal (US)
- Torque Converter - Transmission System: 138.5 l / 36.5 gal (US)
- Differential - Final Drives (each):
- Fuel Tank:
- Differential - Final Drives:
- Torque Converter - Transmission Sump:
Tires
- Standard Tire: 27.00R49 (E4)
- Note (1): Productive capabilities of the 777G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
- Note (2): Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.
ROPS
- ROPS/FOPS Standards: Standards
- FOPS Standards: Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
- ROPS Standards: Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
Sound
- Sound Standards: Standards
- Sound Standards (1): The operator Equivalent Sound Pressure Level (Leq) is 73 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed.
- Sound Standards (2): The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid?gear moving operation is 84 dB(A) for Tier 2 Equivalent.
- Sound Standards (3): Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Steering
- Turning Diameter - Front: 25.3 m / 83 ft
- Steering Standards: ISO 5010:2007
- Steer Angle: 30.5 ° / 30.5 °
- Turning Circle - Clearance Diameter: 28.4 m / 93 ft
Capacity - X Body - 100% Fill Factor
- Heaped 2:1 (SAE): 64.1 m³ / 83.8 yd³
- Struck: 43.1 m³ / 56.3 yd³
- Heaped (SAE 2:1)*:
- Note (1): Contact your local Cat dealer for body recommendation.
- Note (2): *ISO 6483:1980
Capacity - Coal Bodies - 100% Fill Factor
- SAE 2:1 - For use with material densities less than 950 kg/m3 (1,600 lb/yd3): 126 m³ / 165 yd³
- SAE 2:1 - For use with material densities of 1040-1160 kg/m3 (1,750-1,950 lb/yd3): 106 m³ / 139 yd³
- SAE 2:1 - For use with material densities of 1160 kg/m3 (1,950 lb/yd3): 89 m³ / 116 yd³
- SAE 2:1 - For use with material densities of 950-1040 kg/m3 (1,600-1,750 lb/yd3): 110 m³ / 144 yd³
Dimensions
- Overall Tire Width:
Dimensions (Approximate) - Dual Slope
- Dump Clearance:
Dimensions (Approximate) - Dual Slope Floor
- Height - Top of ROPS - Empty:
- Height - Top of ROPS - Loaded:
- Wheel Base:
Dimensions (Approximate) - X Body
- Overall Body Length:
Weights - Dual Slope - With Liner
- Target Gross Machine Weight:
Weights - Dual Slope - Without Liner
- Empty Operating Weight: