STET

773G (Tier 2) – CAMIÕES RÍGIDOS

  • ColeçãoColeçãoCAMIÕES RÍGIDOS
carousel
carousel
carousel
carousel
carousel
carousel
carousel

Descrição

A STET tem o prazer de apresentar a o Caminão para uso fora de estrada, o 773G. Pergunte a si mesmo… Após 40 anos de criação de camiões, a Caterpillar melhorou constantemente a capacidade desse produto e de dar suporte ao seu negócio. A série G foi projetada e fabricada com as mais recentes tecnologias de controlo e qualidade – virtual e hands on. Este produto tem mais de 30.000 horas de desempenho comprovado nas mãos dos clientes antes da produção, e tudo isso garante que o camião esteja pronto para trabalhar.Além da qualidade, os camiões da Série G da Cat® reduzirão os seus custos de 7 maneiras diferentes e ajudá-lo a economizar combustível. Oferecemos dois modos de economia de combustível personalizáveis ​​que permitem escolher o seu nível de rendimento. Com os camiões Cat® G Series na sua frota de transporte, você poderá ser mais produtivo, gastar menos tempo em manutenção e suportar o meio ambiente com novos níveis de desempenho ecológicos. A Sua tripulação irá apreciar todo o novo conforto e conveniências nesta máquina. Resumidamente, os camiões da Série G da Caterpillar poderão e farão uma diferença positiva tanto para seus negócios quanto para as pessoas – o dia todo, todos os dias.

Informações Tećnicas

  • Gross Power – SAE J1995: 615 kW
  • Nominal Payload Class (100%): 56 t
  • Top Speed – Loaded: 67.6 km/h

Mais informações

Engine

  • Engine Model: Cat® C27 ACERT™
  • Rated Engine Speed: 2000 r/min / 2000 r/min
  • Gross Power – SAE J1995: 615 kW / 825 HP
  • Net Power – SAE J1349: 584 kW / 783 HP
  • Net Power – 80/1269/EEC: 590 kW / 791 HP
  • Net Power – ISO 9249: 590 kW / 791 HP
  • Bore: 137 mm / 5.4 in
  • Stroke: 152 mm / 6 in
  • Displacement: 27 l / 1648 in³
  • Engine Power – ISO 14396: 607 kW / 813 HP
  • Net Torque: 3896 N·m / 2874 ft-lb
  • Peak Torque – Speed: 1300 r/min / 1300 r/min
  • Note (1): Power rating applies at 2,000 rpm when tested under the specified condition for the specified standard.
  • Note (2): Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
  • Note (3): No engine derating required up to 3810 m (12,500 ft) for Tier 2 Equivalent.

Weights – Approximate

  • Maximum Gross Vehicle Weight: 102740 kg / 226503 lb

Operating Specifications

  • Nominal Payload Class (100%): 56 t / 61.7 ton (US)
  • Top Speed – Loaded: 67.6 km/h / 42 mile/h
  • Body Capacity – SAE 2:1: 35.75 m³ / 46.75 yd³
  • Maximum Working Payload (110%): 61.5 t / 67.8 ton (US)
  • Not to Exceed Payload (120%)*: 67.1 ton (US) / 74 ton (US)
  • Maximum Allowable Payload (120%)*: 67.1 t / 74 ton (US)
  • Note (1): Capacity with Dual Slope body – no liner.
  • Note (2): *?Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.
  • Target Payload (100%): 56 t / 61.7 ton (US)

Transmission

  • Forward – 1: 10.8 km/h / 6.7 mile/h
  • Forward – 2: 15.1 km/h / 9.4 mile/h
  • Forward – 3: 20.4 km/h / 12.7 mile/h
  • Forward – 4: 27.4 km/h / 17 mile/h
  • Forward – 5: 37 km/h / 23 mile/h
  • Forward – 6: 50.1 km/h / 31.1 mile/h
  • Forward – 7: 67.6 km/h / 42 mile/h
  • Reverse: 14.1 km/h / 8.8 mile/h
  • Note: Maximum travel speeds with standard 24.00R35 (E4) tires.

Final Drives

  • Differential Ratio: 3.64:1
  • Planetary Ratio: 4.80:1
  • Total Reduction Ratio: 17.49:1

Brakes

  • Brake Surface – Front: 655 cm² / 257 in²
  • Brake Surface – Rear: 61269 cm² / 9497 in²
  • Brake Standards: ISO 3450:2011

Body Hoists

  • Pump Flow – High Idle: 448 l/min / 118 gal/min
  • Relief Valve Setting – Raise: 17250 kPa / 2502 psi
  • Relief Valve Setting – Lower: 3450 kPa / 500 psi
  • Body Raise Time – High Idle: 9.5 s / 9.5 s
  • Body Lower Time – Float: 13 s / 13 s
  • Body Power Down – High Idle: 13 s / 13 s

Capacity – Dual Slope – 100% Fill Factor

  • Struck: 26.86 m³ / 35.13 yd³
  • Heaped 2:1 (SAE): 35.75 m³ / 46.76 yd³
  • Heaped (SAE 2:1)*: 35.75 m³ / 46.76 yd³
  • Note (1): Contact your local Cat dealer for body recommendation.
  • Note (2): * ISO 6483:1980.

Capacity – Flat Floor – 100% Fill Factor

  • Struck: 26.25 m³ / 34.33 yd³
  • Heaped 2:1 (SAE): 35.49 m³ / 46.41 yd³
  • Heaped (SAE 2:1)*: 35.49 m³ / 46.41 yd³
  • Note (1): Contact your local Cat dealer for body recommendation.
  • Note (2): * ISO 6483:1980.

Weight Distributions – Approximate

  • Front Axle – Empty: 53 % / 53 %
  • Front Axle – Loaded: 35 % / 35 %
  • Rear Axle – Empty: 47 % / 47 %
  • Rear Axle – Loaded: 65 % / 65 %

Suspension

  • Rear axle – Oscillation: 8.1 ° / 8.1 °
  • Empty Loaded Cylinder Stroke Front: 234 mm / 9.2 in
  • Empty Loaded Cylinder Stroke Rear: 149 mm / 5.8 in

Service Refill Capacities

  • Fuel Tank: 795 l / 210 gal (US)
  • Cooling System: 171 l / 45 gal (US)
  • Differential – Final Drives: 145 l / 38 gal (US)
  • Steering Tank: 36 l / 9.5 gal (US)
  • Steering System – Including Tank: 54 l / 14 gal (US)
  • Brake Hoist System: 322 l / 85 gal (US)
  • Brake/Hoist Hydraulic Tank: 176 l / 46.5 gal (US)
  • Crankcase: 90 l / 24 gal (US)
  • Torque Converter – Transmission System – HRC: 70 l / 18 gal (US)
  • Torque Converter – Transmission System – LRC: 61 l / 16 gal (US)

Tires

  • Standard Tire: 24.00R35 (E4)
  • Note (1): Productive capabilities of the 773G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
  • Note (2): Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.

ROPS

  • ROPS/FOPS Standards: Standards
  • FOPS Standards: Falling Object Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
  • ROPS Standards: Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.

Sound

  • Sound Standards: Standards
  • Sound Standards (1): The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed.
  • Sound Standards (2): The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid?gear moving operation is 86 dB(A).
  • Sound Standards (3): Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.

Steering

  • Turning Diameter – Front: 23.5 m / 77.1 ft
  • Steering Standards: SAE J1511 FEB94 ISO 5010:1992
  • Steer Angle: 31 ° / 31 °
  • Turning Circle – Clearance Diameter: 26.1 m / 85.6 ft

Pedir orçamento

Entraremos em contacto com a melhor proposta.