770G - CAMIÕES RÍGIDOS
- ColeçãoCAMIÕES RÍGIDOS
Descrição
Em 1963, a Caterpillar introduziu o 769, um revolucionário camião construído especificamente para os trabalhos rigorosos da mineração e da construção pesada. Cinquenta anos depois, os nossos camiões continuam melhores. Usamos o melhor da nossa herança robusta e confiável e combinamos isso com tecnologias que ajudam o nosso meio ambiente. Tornam os operadores mais produtivos e melhoram drasticamente a economia de sua frota de transporte. O 770G possui um Sistema de Controle de Tração (TCS) atualizado para mantê-lo em movimento mesmo quando as condições do solo não são perfeitas. O Cliente verá consequentes melhorias por meio de economias de combustível novas e flexíveis. Estamos tornando a experiência operacional cada vez melhor, com mudanças na qualidade de condução, redução de ruído e atualizações da cabine. A herança e o novo uso da tecnologia são combinadas neste camião para uma finalidade - o sucesso contínuo de seus negócios.
Informações Tećnicas
- Gross Power - SAE J1995: 384 kW
- Nominal Payload Class (100%): 38.2 t
- Top Speed - Loaded: 73.7 km/h
Mais informações
Engine
- Note (1): Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard.
- Note (2): Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
- Note (3): No engine derating required up to 3000 m (9,843 ft) altitude.
- Note (4): Meets Japan Small Volume Exemption.
- Engine Model: Cat® C15 ACERT™
- Rated Engine Speed: 1700 r/min / 1700 r/min
- Gross Power - SAE J1995: 384 kW / 515 HP
- Net Power - SAE J1349: 356 kW / 477 HP
- Net Power - ISO 9249: 356 kW / 477 HP
- Net Power - 80/1269/EEC: 365 kW / 489 HP
- Net Power - ISO 14396: 379 kW / 508 HP
- Net Torque - SAE J1349: 2486 N·m / 1834 ft·lbf
- Number of Cylinders: 6
- Bore: 137 mm / 5.4 in
- Stroke: 171 mm / 6.7 in
- Displacement: 15.2 l / 927.6 in³
- Emissions: Meets U.S. EPA Tier 4 and EU Stage V emission standards.
Weights - Approximate
- Note (1): Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires.
- Note (2): Body weight is the standard Dual Slope body with no liner and will vary depending on configuration.
- Target Gross Machine Operating Weight: 71214 kg / 157000 lb
- Target Gross Machine Weight: 71214 kg / 157000 lb
- Chassis Weight: 25378 kg / 55948 lb
- Body Weight: 7850 kg / 17306 lb
Operating Specifications
- Note (1): *Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.
- Note (2): Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight.
- Nominal Payload Class (100%): 38.2 t / 42.1 ton (US)
- Top Speed - Loaded: 73.7 km/h / 45.8 mile/h
- Target Payload Capacity: 38.2 t / 42.1 ton (US)
- Maximum Payload Class (110%): 42 t / 46.3 ton (US)
- Not to Exceed Payload (120%): 50.4 t / 50.5 ton (US)
- Body Capacity - SAE 2:1: 25.2 m³ / 32.9 yd³
- Target Payload (100%): 38.2 t / 42.1 ton (US)
- Maximum Working Payload (110%): 42 t / 46.3 ton (US)
- Maximum Allowable Payload (120%)*: 45.8 t / 50.5 ton (US)
Transmission
- Note: Maximum travel speeds with standard 18.00R33 (E4) tires.
- Forward - 1: 11.9 km/h / 7.4 mile/h
- Forward - 2: 16.3 km/h / 10.1 mile/h
- Forward - 3: 22.2 km/h / 13.8 mile/h
- Forward - 4: 29.8 km/h / 18.5 mile/h
- Forward - 5: 40.4 km/h / 25.1 mile/h
- Forward - 6: 54.4 km/h / 33.8 mile/h
- Forward - 7: 73.7 km/h / 45.8 mile/h
- Reverse: 14.2 km/h / 8.8 mile/h
Brakes
- Note: Target gross machine operating weight is 71 214 kg (157,000 lb).
- Brake Surface - Front: 1395 cm² / 216 in²
- Brake Surface - Rear: 40225 cm² / 6235 in²
- Brake Standards: ISO 3450:2011
Steering
- Note: Target gross machine operating weight is 71 214 kg (157,000 lb).
- Steering Standards: ISO 5010:2007
- Steer Angle: 40.5 ° / 40.5 °
- Turning Diameter - Front: 17.6 m / 57.7 ft
- Turning Circle - Clearance Diameter: 20.3 m / 66.6 ft
Tires
- Note (1): Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
- Note (2): Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection.
- Standard Tire: 18.00R33 (E4)
Final Drives
- Differential Ratio: 1.92:1
- Planetary Ratio: 4.80:1
- Total Reduction Ratio: 9.26:1
Body Hoists
- Pump Flow - High Idle: 448 l/min / 118 gal/min
- Relief Valve Setting - Raise: 18950 kPa / 2750 psi
- Relief Valve Setting - Lower: 3450 kPa / 500 psi
- Body Raise Time - High Idle: 7.5 s / 7.5 s
- Body Lower Time - Float: 10 s / 10 s
- Body Power Down - High Idle: 10 s / 10 s
Capacity - Dual Slope - 100% Fill Factor
- Struck: 17.6 m³ / 23.01 yd³
- Heaped 2:1 (SAE): 25.2 m² / 32.9 yd²
- Heaped (SAE 2:1)*: 25.2 m³ / 32.9 yd³
- Note (1): Contact your local Cat dealer for body recommendation.
- Note (2): *ISO 6483:1980.
Capacity - Flat Floor - 100% Fill Factor
- Struck: 17.6 m³ / 23.01 yd³
- Heaped 2:1 (SAE): 25.2 m² / 32.9 yd²
- Heaped (SAE 2:1)*: 25.2 m³ / 32.9 yd³
- Note (1): Contact your local Cat dealer for body recommendation.
- Note (2): *ISO 6483:1980.
Weight Distributions - Approximate
- Front Axle - Empty: 49 % / 49 %
- Front Axle - Loaded: 34 % / 34 %
- Rear Axle - Empty: 51 % / 51 %
- Rear Axle - Loaded: 66 % / 66 %
Suspension
- Empty Loaded Cylinder Stroke Front: 234 mm / 9.2 in
- Empty Loaded Cylinder Stroke Rear: 149 mm / 5.9 in
- Rear axle - Oscillation: 8.9 ° / 8.9 °
Service Refill Capacities
- Fuel Tank: 530 l / 140 gal (US)
- Cooling System: 125 l / 33 gal (US)
- Crankcase: 64 l / 17 gal (US)
- Differential - Final Drives: 180 l / 47 gal (US)
- Steering Tank: 55 l / 14.5 gal (US)
- Steering System - Including Tank: 87 l / 23 gal (US)
- Brake/Hoist Hydraulic Tank: 145 l / 38 gal (US)
- Brake Hoist System: 227 l / 60 gal (US)
- Torque Converter - Transmission System: 64 l / 17 gal (US)
- DEF Tank: 21 l / 6 gal (US)
ROPS
- ROPS Standards: Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
- FOPS Standards: Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
Sound
- Sound Standards (1): Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
- Sound Standards (2): Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A).
- Sound Standards (3): Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used.
Dimensions
- Height - Top of ROPS: 3857 mm / 12.7 ft
- Overall Body Length: 8199 mm / 26.8 ft
- Inside Body Length: 5635 mm / 18.5 ft
- Overall Length: 8796 mm / 28.9 ft
- Wheel Base: 3960 mm / 13 ft
- Rear Axle - Tail: 2586 mm / 8.5 ft
- Ground Clearance: 518 mm / 1.6 ft
- Dump Clearance: 506 mm / 1.7 ft
- Loading Height - Empty: 3147 mm / 10.3 ft
- Inside Body Depth - Maximum: 1404 mm / 4.6 ft
- Overall Height - Body Raised: 8255 mm / 27.1 ft
- Operating Width: 4780 mm / 15.7 ft
- Centerline Front Tire Width: 3110 mm / 10.2 ft
- Engine Guard Clearance: 335 mm / 1.8 ft
- Outside Body Width: 3931 mm / 12.9 ft
- Inside Body Width: 3627 mm / 11.9 ft
- Front Canopy Height: 4114 mm / 13.5 ft
- Rear Axle - Clearance: 548 mm / 1.8 ft
- Centerline of Rear Dual Tire Width: 2536 mm / 8.3 ft
- Overall Tire Width: 3693 mm / 12.1 ft