STET

740 GC Camião Articulado

  • ColeçãoColeçãoCAMIÕES ARTICULADOS
carousel
carousel
carousel
carousel
carousel
carousel
carousel

Descrição

O Camião Cat® 740 GC com uma capacidade de 22,7 m³,até 40 toneladas, oferece confiança, durabilidade e melhores desempenhos. Inclui a mais recente estação de operação de classe mundial encontrada em outros Caminões Articulados Cat®.

Informações Tećnicas

  • Gross Power – SAE J1995: 337 kW
  • Rated Payload: 36.3 t
  • Heaped (SAE 2:1): 22.7 m³

Mais informações

Engine

  • Note (5): DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard ISO 22241-1. Requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
  • Engine Model: Cat® C15 ACERT™
  • Bore: 137 mm / 5.4 in
  • Stroke: 171.5 mm / 6.75 in
  • Displacement: 15.2 l / 926 in³
  • Engine Model – U.S. EPA Tier 4 Final/EU Stage IV: Cat C15 ACERT
  • Gross Power – SAE J1995: 337 kW / 452 HP
  • Net Power – ISO 14396: 333 kW / 447 HP
  • Net Power – SAE J1349: 327 kW / 439 HP
  • No Engine De-rating Below: 3050 m / 10000 ft
  • Peak Engine Torque Gross (SAE J1995): 2320 N·m / 1711 ft·lbf
  • Peak Engine Torque Net (SAE J1349): 2264 N·m / 1670 ft·lbf
  • Peak Engine Torque Speed: 1200 r/min / 1200 r/min
  • Emissions: The C15 engine meets Tier 4 Final/Stage IV emission standards.
  • Note (1): The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
  • Note (2): The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
  • Note (3): The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
  • Note (4): Net power when the fan is at maximum speed is 327 kW (439 hp) per the SAE reference conditions.

Weights

  • Rated Payload: 36.3 t / 40 ton (US)

Body Capacities

  • Heaped (SAE 2:1): 22.7 m³ / 29.7 yd³
  • Struck: 17 m³ / 22.2 yd³
  • Tailgate Heaped SAE 2:1: 24.4 m³ / 31.9 yd³
  • Tailgate Struck: 17.9 m³ / 23.4 yd³

Transmission

  • Forward – 1: 6.4 km/h / 4 mile/h
  • Forward – 2: 8.5 km/h / 5.3 mile/h
  • Forward – 3: 11.5 km/h / 7.3 mile/h
  • Forward – 4: 14.8 km/h / 9.2 mile/h
  • Forward – 5: 19.7 km/h / 12.2 mile/h
  • Forward – 6: 24 km/h / 14.9 mile/h
  • Reverse – 1: 6.8 km/h / 4.2 mile/h
  • Forward – 7: 33.1 km/h / 20.6 mile/h
  • Forward – 8: 39.8 km/h / 24.7 mile/h
  • Forward – 9: 57.5 km/h / 35.7 mile/h
  • Reverse – 2: 15.7 km/h / 9.8 mile/h

Sound Levels

  • Interior Cab: 72 dB(A) / 72 dB(A)
  • Note (1): The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
  • Note (2): Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Operating Weights

  • Center Axle – Empty: 6639 kg / 14636 lb
  • Center Axle – Loaded: 23173 kg / 51088 lb
  • Center Axle – Rated Load: 17087 kg / 37670 lb
  • Front Axle – Empty: 19321 kg / 42596 lb
  • Front Axle – Loaded: 22554 kg / 49723 lb
  • Front Axle – Rated Load: 2126 kg / 4687 lb
  • Rear Axle – Empty: 6416 kg / 14145 lb
  • Rear Axle – Loaded: 22949 kg / 50594 lb
  • Rear Axle – Rated Load: 17087 kg / 37670 lb
  • Total – Empty: 32376 kg / 71377 lb
  • Total – Loaded: 68676 kg / 151405 lb
  • Total – Rated Load: 36300 kg / 80027 lb

Service Refill Capacities

  • Fuel Tank: 550 l / 145.3 gal (US)
  • Cooling System: 90 l / 23.7 gal (US)
  • Engine Crankcase: 52 l / 13.7 gal (US)
  • Axles – Each: 60 l / 15.8 gal (US)
  • Brake Cooling Tank: 67 l / 17.7 gal (US)
  • DEF Tank: 25 l / 6.5 gal (US)
  • Final Drive – Each: 5 l / 1.3 gal (US)
  • Steering/Hoist Hydraulic System: 140 l / 36.9 gal (US)
  • Transmission – OTG: 75 l / 19.8 gal (US)

Body Hoist

  • Raise Time: 12 s / 12 s
  • Lower Time: 12 s / 12 s

Steering

  • Lock to Lock: 4.75 seconds @ 60 rpm

Standards

  • Brakes: ISO 3450 – 2011
  • Cab – FOPS: ISO 3449 Level II – 2005
  • Cab – ROPS: ISO 3471 – 2008
  • Steering: ISO 5010 – 2007

Body Plate

  • Type: High strength Brinell HB450 wear resistant steel

Turning Circle

  • Note: Dimensions are for machines equipped with 29.5 R25 tires.
  • Turning Dimensions – Aisle Width: 5595 mm / 220 in
  • Turning Dimensions – Clearance Radius: 8395 mm / 330 in
  • Turning Dimensions – Inside Radius: 3960 mm / 156 in
  • Turning Dimensions – SAE Turning Radius: 7698 mm / 303 in
  • Turning Dimensions – Steer Angle – Left/Right: 45°

Body Plate Thickness

  • Base Plate: 13 mm / 0.51 in
  • Front Plate: 7 mm / 0.28 in
  • Side Plates: 11 mm / 0.43 in

Optimal Loader/Truck Pass Matching

  • Hydraulic Excavator: 352F – Passes: 5–6
  • Hydraulic Excavator: 374F – Passes: 3–4
  • Note: An optimum system match gives you a major productivity advantage. The 740 GC is an excellent match for the Cat 374F and 352F Hydraulic Excavators; and Cat 972M, 966M, and 962M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
  • Wheel Loader: 962M – Passes: 5
  • Wheel Loader: 966M – Passes: 4–5
  • Wheel Loader: 972M – Passes: 3

Pedir orçamento

Entraremos em contacto com a melhor proposta.

Para enviar, é obrigatório concordar com os termos abaixo:
Concordo com o tratamento dos meus dados, segundo a política de privacidade, de acordo com as boas práticas do Regulamento Geral sobre a Proteção de Dados (GDPR).
Concordo com o compartilhamento dos meus dados com a empresa STET, para que ela possa dar resposta ao meu contacto.