O Camião Cat® 725C2, com capacidade de 24 m (19,5 toneladas) e 15 m3 (19,6 yd3), oferece confiança, durabilidade, alta produtividade, conforto superior ao operador e custos operacionais reduzidos. A actualização do 725C inclui todos os travões húmidos fechados no eixo e Controle Automático de Tração torna o 725C2 a melhor opção para nossos clientes. Níveis líderes de classe de desempenho e conforto do operador contribuem para uma máquina produtiva durante todo o dia.

Informações Tećnicas

• Gross Power - SAE J1995: 239 kW
• Rated Payload: 24 ton (US)
• Heaped (SAE 2:1): 15 m³

Mais informações

Engine

• Engine Model: Cat C9.3 ACERT
• Bore: 115 mm / 4.53 in
• Stroke: 149 mm / 5.87 in
• Displacement: 9.3 l / 567 in³
• Engine Model - U.S. EPA Tier 4 Final/EU Stage IV: Cat® C9.3 ACERT™
• Gross Power - SAE J1995: 239 kW / 320 HP
• Net Power - ISO 14396: 236 kW / 316 HP
• Net Power - SAE J1349: 234 kW / 314 HP
• No Engine De-rating Below: 2290 m / 7500 ft
• Peak Engine Torque Gross (SAE J1995): 1729 N·m / 1275 ft·lbf
• Peak Engine Torque Net (SAE J1349): 1712 N·m / 1262 ft·lbf
• Peak Engine Torque Speed: 1200 r/min / 1200 r/min
• Emissions: The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
• Note (1): The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
• Note (2): The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
• Note (3): Net power when the fan is at maximum speed is 214 kW (287 hp) per the SAE reference conditions.
• Note (4): DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.

Weights

• Rated Payload: 24 ton (US) / 26.5 ton (US)

Body Capacities

• Heaped (SAE 2:1): 15 m³ / 19.6 yd³
• Struck: 11 m³ / 14.4 yd³
• Tailgate Heaped SAE 2:1: 15.6 m³ / 20.4 yd³
• Tailgate Struck: 11.1 m³ / 14.5 yd³

Transmission

• Forward - 1: 8 km/h / 5 mT/hr
• Forward - 2: 15 km/h / 9 mT/hr
• Forward - 3: 22 km/h / 14 mT/hr
• Forward - 4: 34 km/h / 21 mT/hr
• Forward - 5: 47 km/h / 29 mT/hr
• Forward - 6: 55 km/h / 36 mT/hr
• Reverse - 1: 9 km/h / 6 mT/hr

Sound Levels

• Interior Cab: 76 dB(A) / 76 dB(A)
• Note (1): The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
• Note (2): Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Operating Weights

• Center Axle - Empty: 4425 kg / 9755 lb
• Center Axle - Loaded: 15175 kg / 33455 lb
• Center Axle - Rated Load: 10750 kg / 23700 lb
• Front Axle - Empty: 14440 kg / 31835 lb
• Front Axle - Loaded: 16940 kg / 37374 lb
• Front Axle - Rated Load: 2500 kg / 5512 lb
• Rear Axle - Empty: 4175 kg / 9205 lb
• Rear Axle - Loaded: 14925 kg / 32905 lb
• Rear Axle - Rated Load: 10750 kg / 23700 lb
• Total - Empty: 23040 kg / 50795 lb
• Total - Loaded: 47040 kg / 103707 lb
• Total - Rated Load: 24000 kg / 52912 lb

Service Refill Capacities

• Fuel Tank: 412 l / 108.8 gal (US)
• Cooling System: 83 l / 21.9 gal (US)
• Hydraulic System: 110 l / 29.1 gal (US)
• Engine Crankcase: 38 l / 10 gal (US)
• Transmission: 47 l / 12.4 gal (US)
• Final Drives/Differential: 125 l / 33 gal (US)
• Output Transfer Gear Box: 24 l / 6.3 gal (US)
• DEF Tank: 20 l / 5.3 gal (US)

Body Hoist

• Raise Time: 10 s / 10 s
• Lower Time: 8 s / 8 s

Steering

• Lock to Lock: 4.75 seconds @ 60 rpm

Standards

• Brakes: ISO 3450 – 2011
• Cab - FOPS: ISO 3449 Level II – 2005
• Cab - ROPS: ISO 3471 – 2008
• Steering: ISO 5010 – 2007

Body Plate

• Type: High strength Brinell HB450 wear resistant steel

Turning Circle

• Note: Dimensions are for machines equipped with 23.5R25 tires.
• Turning Dimensions - Aisle Width: 5332 mm / 210 in
• Turning Dimensions - Clearance Radius: 8075 mm / 318 in
• Turning Dimensions - Inside Radius: 3879 mm / 153 in
• Turning Dimensions - SAE Turning Radius: 7470 mm / 294 in
• Turning Dimensions - Steer Angle - Left/Right: 45°