STET

304.5E2 XTC – ESCAVADORAS

  • ColeçãoColeçãoESCAVADORAS
carousel

Descrição

A Mini Escavadora Cat® 304.5E2 XTC é o primeiro modelo da linha Xtra Tool Carrier (XTC) e oferece desempenho, durabilidade e versatilidade num design compacto.

Informações Tećnicas

  • Gross Power – ISO 14396: 31.2 kW
  • Operating Weight: 4080 kg

Mais informações

Engine

  • Engine Model: Cat C2.4
  • Net Power: 30 kW / 40.2 HP
  • Rated Net Power – 2,200 rpm – ISO 9249/EEC 80/1269: 30 kW / 40.2 HP
  • Bore: 87 mm / 3.4 in
  • Displacement: 2.4 l / 146 in³
  • Stroke: 102.4 mm / 4 in
  • Emissions: Meets U.S. EPA Tier 4 Final/EU Stage IIIA emission standards.
  • Gross Power – ISO 14396: 31.2 kW / 41.8 HP

Weights

  • Operating Weight: 4080 kg / 8996 lb
  • Weight – Canopy, Standard Stick: 3925 kg / 8655 lb
  • Note: Weight includes counterweight, rubber tracks, bucket, operator, full fuel and auxiliary lines.
  • Weight – Cab, Long Stick: 4080 kg / 8996 lb
  • Weight – Cab, Standard Stick: 4050 kg / 8930 lb
  • Weight – Canopy, Long Stick: 3955 kg / 8721 lb

Travel System

  • Maximum Traction Force – High Speed: 16.9 kN / 3799 lb
  • Maximum Traction Force – Low Speed: 31 kN / 6969 lb
  • Travel Speed – High: 5.1 km/h / 3.2 mile/h
  • Travel Speed – Low: 3.1 km/h / 1.9 mile/h
  • Gradeability – Continuous Operation: 20°
  • Gradeability – Maximum: 30°
  • Ground Pressure – Cab Long Stick: 29.8 kPa / 4.3 psi
  • Ground Pressure – Cab Standard Stick: 29.6 kPa / 4.3 psi
  • Ground Pressure – Canopy Long Stick: 28.9 kPa / 4.2 psi
  • Ground Pressure – Canopy Standard Stick: 28.7 kPa / 4.2 psi

Hydraulic System

  • Auxiliary Circuit – Primary (245 bar/3,553 psi): 70 l/min / 18.5 gal/min
  • Auxiliary Circuit – Secondary (174 bar/2,524 psi): 25 l/min / 6.6 gal/min
  • Digging Force – Stick – Long: 19.5 kN / 4384 lb
  • Digging Force – Stick – Standard: 21.6 kN / 4856 lb
  • Operating Pressure – Equipment: 245 bar / 3553 psi
  • Operating Pressure – Swing: 216 bar / 3132 psi
  • Operating Pressure – Travel: 245 bar / 3553 psi
  • Pump Flow at 2,200 rpm: 100 l/min / 26.4 gal/min
  • Digging Force – Bucket: 37.8 kN / 8498 lb
  • Type: Load Sensing Hydraulics with Variable Displacement Piston Pump

Swing System

  • Machine Swing Speed: 10 r/min / 10 r/min
  • Boom Swing – Left – With Stop*: 55°
  • Boom Swing – Left – Without Stop*: 80°
  • Boom Swing – Right: 50°
  • Note: *Automatic swing brake, spring applied, hydraulic release.

Blade

  • Width: 1950 mm / 76.8 in
  • Height: 325 mm / 12.8 in
  • Dig Depth: 470 mm / 18.5 in
  • Lift Height: 400 mm / 15.7 in

Service Refill Capacities

  • Cooling System: 5.5 l / 1.5 gal (US)
  • Engine Oil: 9.5 l / 2.5 gal (US)
  • Hydraulic Tank: 25 l / 6.6 gal (US)
  • Fuel Tank: 57 l / 15.1 gal (US)
  • Hydraulic System: 58 l / 15.3 gal (US)

Cab

  • Dynamic Operator Sound Pressure Level (ISO 6396:2008): 81 dB(A) / 81 dB(A)
  • Exterior Sound Power Level – ISO 6395:2008*: 96 dB(A) / 96 dB(A)
  • Note: *European Union Directive “2000/14/EC”

Certification – Cab and Canopy

  • Roll Over Protective Structure (ROPS): ISO 12117-2
  • Tip Over Protective Structure (TOPS): ISO 12117
  • Top Guard: ISO 10262 (Level I)

Dimensions – Long Stick

  • Boom Height – Shipping Position: 1770 mm / 70 in
  • Boom In Reach: 2220 mm / 87 in
  • Boom Swing – Left: 670 mm / 26 in
  • Boom Swing – Right: 735 mm / 29 in
  • Dig Depth: 3430 mm / 135 in
  • Maximum Blade Depth: 470 mm / 19 in
  • Maximum Blade Height: 400 mm / 16 in
  • Maximum Dig Height: 5070 mm / 200 in
  • Maximum Dump Clearance: 3690 mm / 145 in
  • Maximum Reach: 5590 mm / 220 in
  • Maximum Reach – Ground Level: 5470 mm / 215 in
  • O/A Shipping Height: 2500 mm / 98 in
  • O/A Shipping Length: 4930 mm / 194 in
  • O/A Track Width: 1950 mm / 77 in
  • O/A Undercarriage Length: 2220 mm / 87 in
  • Swing Bearing – Height: 565 mm / 22 in
  • Tail Swing: 975 mm / 38 in
  • Track Belt/Shoe Width: 350 mm / 14 in
  • Vertical Wall: 2560 mm / 101 in

Dimensions – Standard Stick

  • Boom Height – Shipping Position: 1480 mm / 58 in
  • Boom In Reach: 2110 mm / 83 in
  • Boom Swing – Left: 670 mm / 26 in
  • Boom Swing – Right: 735 mm / 29 in
  • Dig Depth: 3130 mm / 123 in
  • Maximum Blade Depth: 470 mm / 19 in
  • Maximum Blade Height: 400 mm / 16 in
  • Maximum Dig Height: 4980 mm / 196 in
  • Maximum Dump Clearance: 3590 mm / 141 in
  • Maximum Reach: 5350 mm / 211 in
  • Maximum Reach – Ground Level: 5220 mm / 206 in
  • O/A Shipping Height: 2500 mm / 98 in
  • O/A Shipping Length: 4820 mm / 190 in
  • O/A Track Width: 1950 mm / 77 in
  • O/A Undercarriage Length: 2220 mm / 87 in
  • Swing Bearing – Height: 565 mm / 22 in
  • Tail Swing: 975 mm / 38 in
  • Track Belt/Shoe Width: 350 mm / 14 in
  • Vertical Wall: 2420 mm / 95 in

Lift Capacities at Ground Level (Long Stick)* – Lift Point Radius: 3000 mm (118 in)

  • Blade Down – Front: 1570 kg / 3462 lb
  • Blade Down – Side: 910 kg / 2007 lb
  • Blade Up – Front: 820 kg / 1808 lb
  • Blade Up – Side: 820 kg / 1808 lb
  • Note: *The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart.

Lift Capacities at Ground Level (Long Stick)* – Lift Point Radius: 4500 mm (177 in)

  • Blade Down – Front: 860 kg / 1896 lb
  • Blade Down – Side: 480 kg / 1058 lb
  • Blade Up – Front: 430 kg / 948 lb
  • Blade Up – Side: 430 kg / 948 lb
  • Note: *The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart.

Lift Capacities at Ground Level (Standard Stick)* – Lift Point Radius: 3000 mm (118 in)

  • Blade Down – Front: 1610 kg / 3550 lb
  • Blade Down – Side: 920 kg / 2029 lb
  • Blade Up – Front: 830 kg / 1830 lb
  • Blade Up – Side: 830 kg / 1830 lb
  • Note: *The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart.

Lift Capacities at Ground Level (Standard Stick)* – Lift Point Radius: 4500 mm (177 in)

  • Blade Down – Front: 1040 kg / 2293 lb
  • Blade Down – Side: 590 kg / 1301 lb
  • Blade Up – Front: 530 kg / 1169 lb
  • Blade Up – Side: 530 kg / 1169 lb
  • Note: *The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart.

Operating Specifications

  • Machine Overhang: 0 mm / 0 in
  • Stick Length – Long: 1615 mm / 64 in
  • Stick Length – Standard: 1315 mm / 52 in

Operating Specifications – Loader

  • Breakout Force – Lift – 1829 mm (72 in) MP Bucket: 720 kg / 1588 lb
  • Breakout Force – Tilt – 1829 mm (72 in) MP Bucket: 850 kg / 1874 lb
  • Lift Capacity – 1070 mm (42 in) Forks: 600 kg / 1323 lb
  • Lift Capacity – 1829 mm (72 in) MP Bucket: 525 kg / 1158 lb
  • Maximum Dump Angle – 1829 mm (72 in) MP Bucket: 27°
  • Maximum Height – 1829 mm (72 in) MP Bucket with Cutting Edge: 935 mm / 37 in
  • Note: *Rated operating capacity based on hydraulic limit (ROC is the smaller of the hydraulic limit or 50% of the static tipping load).
  • Rack Back Angle – Maximum Height – 1829 mm (72 in) MP Bucket: 48°
  • Rated Operating Capacity* – Ground – 1829 mm (72 in) MP Bucket: 850 kg / 1874 lb
  • Rated Operating Capacity* – Maximum Height – 1829 mm (72 in) MP Bucket: 525 kg / 1158 lb
  • Reach – Maximum Lift/Dump – 1829 mm (72 in) MP Bucket: 2040 mm / 80 in

Undercarriage

  • Number of Carrier Rollers: 1
  • Number of Track Rollers: 4
  • Track Roller Type: Center Flange

Pedir orçamento

Entraremos em contacto com a melhor proposta.