facebook_pixel160/160 AWD - MOTONIVELADORAS | Projectista
STET

160/160 AWD - MOTONIVELADORAS

  • ColeçãoColeçãoMOTONIVELADORAS
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel

Descrição

Reduce your carbon footprint with the latest in emissions reduction technology with the durable 160 motor grader. The 160 motor grader unites comfortability and productivity to get optimal performance on the jobsite. Get the best visibility with angled cab doors, tapered engine enclosure, and sloped rear window.

Informações Tećnicas

  • Base Power (1st Gear) - Net: 165 kW
  • Operating Weight - Typically Equipped: 20660 kg
  • Blade Width: 4.2 m

Mais informações

Engine

  • Base Power (1st Gear) - Net: 165 kW / 221 HP
  • Engine Model: Cat® C9.3
  • Bore: 115 mm / 4.5 in
  • Stroke: 149 mm / 5.9 in
  • Speed at Rated Power: 2,000 rpm
  • Base Power (1st Gear) - Net - Metric: 165 kW / 224 HP
  • Emissions: U.S. EPA Tier 4 Final/EU Stage V
  • High Ambient - Fan Speed - Standard: 1,400 rpm
  • Maximum Torque - VHP Plus: 1355 N·m / 1000 lb/ft
  • Standard Capability: 43 °C / 109 °F
  • Torque Rise: 39%
  • VHP Plus - Gear - Net Power - Forward 1st: 165 kW / 221 HP
  • VHP Plus - Gear - Net Power - Forward 2nd: 172 kW / 231 HP
  • VHP Plus - Gear - Net Power - Forward 3rd: 180 kW / 241 HP
  • VHP Plus - Gear - Net Power - Forward 4th: 188 kW / 252 HP
  • VHP Plus - Gear - Net Power - Forward 5th: 191 kW / 257 HP
  • VHP Plus - Gear - Net Power - Forward 6th: 195 kW / 262 HP
  • VHP Plus - Gear - Net Power - Forward 7th: 199 kW / 267 HP
  • VHP Plus - Gear - Net Power - Forward 8th: 203 kW / 272 HP
  • VHP Plus - Gear - Net Power - Reverse 1st: 165 kW / 221 HP
  • VHP Plus - Gear - Net Power - Reverse 2nd: 172 kW / 231 HP
  • VHP Plus - Gear - Net Power - Reverse 3rd-6th: 180 kW / 241 HP
  • VHP Plus Range - Net: 165-203 kW (221-272 hp)
  • VHP Plus Range - Net - Metric: 165-203 kW (224-276 hp)
  • Displacement: 9.3 l / 567.5 in³
  • Number of Cylinders: 6
  • Derating Altitude: 3050 m / 10000 ft
  • High Ambient - Fan Speed - Maximum: 1,550 rpm
  • High Ambient - Fan Speed - Minimum: 500 rpm
  • High - Ambient Capability: 50 °C / 122 °F

Power Train

  • Forward/Reverse Gears: 8 Forward/6 Reverse
  • Transmission: APECS, Direct Drive, Powershift
  • Brakes - Service: Multiple Oil Disc
  • Brakes - Service - Surface Area: 23000 cm² / 3565 in²
  • Brakes - Parking: Multiple Oil Disc
  • Brakes - Secondary: Dual Circuit Control

Hydraulic System

  • Circuit Type: Parallel
  • Pump Type: Variable Piston
  • Pump Output: 210 l/min / 55.5 gal/min
  • Maximum System Pressure: 24150 kPa / 3503 psi
  • Reservoir Tank Capacity: 64 l / 16.9 gal (US)
  • Standby Pressure: 6100 kPa / 885 psi

Operating Specifications

  • Top Speed - Forward: 47.4 km/h / 29.5 mile/h
  • Top Speed - Reverse: 37.4 km/h / 23.3 mile/h
  • Turning Radius - Outside Front Tires: 7.8 m / 25.59 ft
  • Steering Range - Left/Right: 50°
  • Articulation Angle - Left/Right: 20°
  • Forward - 1st: 4.1 km/h / 2.6 mile/h
  • Forward - 2nd: 5.6 km/h / 3.5 mile/h
  • Forward - 3rd: 8.1 km/h / 5.1 mile/h
  • Forward - 4th: 11.2 km/h / 7 mile/h
  • Forward - 5th: 17.4 km/h / 10.8 mile/h
  • Forward - 6th: 23.7 km/h / 14.7 mile/h
  • Forward - 7th: 32.6 km/h / 20.3 mile/h
  • Forward - 8th: 47.4 km/h / 29.5 mile/h
  • Reverse - 1st: 3.3 km/h / 2 mile/h
  • Reverse - 2nd: 6.1 km/h / 3.8 mile/h
  • Reverse - 3rd: 8.8 km/h / 5.5 mile/h
  • Reverse - 4th: 13.7 km/h / 8.5 mile/h
  • Reverse - 5th: 25.7 km/h / 16 mile/h
  • Reverse - 6th: 37.4 km/h / 23.3 mile/h

Service Refill

  • Fuel Capacity: 394 l / 104 gal (US)
  • Cooling System: 57 l / 15 gal (US)
  • Hydraulic System - Total: 100 l / 26.4 gal (US)
  • Hydraulic System - Tank: 64 l / 16.9 gal (US)
  • Diesel Exhaust Fluid: 22 l / 5.8 gal (US)
  • Transmission - Differential - Final Drives: 70 l / 18.5 gal (US)
  • Engine Oil: 30 l / 7.9 gal (US)
  • Tandem Housing - Each: 87 l / 22.9 gal (US)
  • Front Wheel Spindle Bearing Housing: 0.5 l / 0.13 gal (US)
  • Circle Drive Housing: 7 l / 1.8 gal (US)

Frame

  • Drawbar - Width: 76.2 mm / 3 in
  • Circle - Diameter: 1553 mm / 61.1 in
  • Circle - Blade Beam Thickness: 40 mm / 1.6 in
  • Drawbar - Height: 152 mm / 6 in
  • Circle - Height: 160 mm / 6.3 in
  • Front Frame Structure - Height: 321 mm / 12.6 in
  • Front Frame Structure - Width: 305 mm / 12 in
  • Drawbar - Thickness: 12.7 mm / 0.5 in
  • Front-Top/Bottom Plate - Width: 305 mm / 12 in
  • Front-Top/Bottom Plate - Thickness: 22 mm / 0.87 in
  • Front Axle - Height to Center: 596 mm / 23.5 in
  • Front Axle - Wheel Lean - Left/Right: 18°
  • Front Axle - Total Oscillation per Side: 32°

Tandems

  • Height: 572 mm / 22.5 in
  • Width: 204 mm / 8 in
  • Sidewall Thickness - Inner: 17.5 mm / 0.69 in
  • Sidewall Thickness - Outer: 18 mm / 0.71 in
  • Drive Chain Pitch: 50.8 mm / 2 in
  • Wheel Axle Spacing: 1523 mm / 60 in
  • Tandem Oscillation - Front Up: 15°
  • Tandem Oscillation - Front Down: 25°

Moldboard

  • Blade Width: 4.2 m / 14 ft
  • Moldboard - Height: 610 mm / 24 in
  • Moldboard - Thickness: 22 mm / 0.87 in
  • Arc Radius: 413 mm / 16.3 in
  • Throat Clearance: 166 mm / 6.5 in
  • Cutting Edge Width: 152 mm / 6 in
  • Cutting Edge Thickness: 16 mm / 0.6 in
  • End Bit - Width: 152 mm / 6 in
  • End Bit - Thickness: 16 mm / 0.6 in
  • Blade Pull - Base GVW: 11762 kg / 25931 lb
  • Blade Pull - Maximum GVW: 15541 kg / 34262 lb
  • Blade Down Pressure - Base GVW: 7713 kg / 17004 lb
  • Blade Down Pressure - Maximum GVW: 13294 kg / 29308 lb
  • Moldboard - Blade Width: 4.2 m / 14 ft

Blade Range

  • Circle Centershift - Right: 728 mm / 28.7 in
  • Circle Centershift - Left: 695 mm / 27.4 in
  • Moldboard Sideshift - Right: 660 mm / 26 in
  • Moldboard Sideshift - Left: 510 mm / 20.1 in
  • Maximum Blade Position Angle: 90°
  • Blade Tip Range - Forward: 40°
  • Blade Tip Range - Backward:
  • Maximum Lift Above Ground: 452 mm / 17.8 in
  • Maximum Depth of Cut: 750 mm / 29.5 in
  • Maximum Shoulder Reach Outside of Tires - Left: 2090 mm / 82.3 in
  • Maximum Shoulder Reach Outside of Tires - Right: 2278 mm / 89.7 in

Ripper

  • Ripper Shank Holder Spacing: 533 mm / 21 in
  • Ripping Depth - Maximum: 426 mm / 16.8 in
  • Ripper Shank Holders: 5
  • Penetration Force: 9440 kg / 20812 lb
  • Pry-Out Force: 12924 kg / 28493 lb
  • Machine Length Increase, Beam Raised: 1031 mm / 40.6 in

Scarifier

  • Front, V-Type - Working Width: 1205 mm / 47.4 in
  • Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing: 116 mm / 4.6 in
  • Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders: 5/11
  • Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum: 467 mm / 18.4 in
  • Front, V-Type, 5 or 11 Tooth - Working Width: 1031 mm / 40.6 in
  • Mid, V-Type - Scarifier Shank Holder Spacing: 116 mm / 4.6 in
  • Mid, V-Type - Scarifier Shank Holders: 11
  • Mid, V-Type - Scarifying Depth, Maximum: 292 mm / 11.5 in
  • Mid, V-Type - Working Width: 1184 mm / 46.6 in
  • Rear - Scarifying Depth, Maximum: 426 mm / 16.8 in
  • Rear - Working Width: 2133 mm / 84 in
  • Rear - Scarifier Shank Holders: 9
  • Rear - Scarifier Shank Holder Spacing: 267 mm / 10.5 in

Weights

  • Operating Weight - Typically Equipped: 20660 kg / 45547 lb
  • Gross Vehicle Weight - Maximum - Rear Axle: 17268 kg / 38069 lb
  • Gross Vehicle Weight - Base - Front Axle: 4494 kg / 9907 lb
  • Gross Vehicle Weight - Base - Rear Axle: 13069 kg / 28812 lb
  • Gross Vehicle Weight - Maximum - Total: 25013 kg / 55144 lb
  • Gross Vehicle Weight - Base - Total: 17563 kg / 38719 lb
  • Gross Vehicle Weight - Maximum - Front Axle: 7745 kg / 17075 lb
  • Operating Weight - Typically Equipped - Front Axle: 6004 kg / 13237 lb
  • Operating Weight - Typically Equipped - Rear Axle: 14656 kg / 32310 lb
  • Operating Weight - Typically Equipped - Total: 20660 kg / 45547 lb

Dimensions

  • Height - Top of Cab: 3308 mm / 130 in
  • Length - Counterweight to Ripper: 10136 mm / 399 in
  • Width - Outside Front Tires: 2511 mm / 98.9 in
  • Length - Front Axle to Mid Tandem: 6123 mm / 241 in
  • Length - Front Tire to Rear of Machine: 8912 mm / 351 in
  • Length - Front Axle to Moldboard: 2552 mm / 100 in
  • Length - Between Tandem Axles: 1523 mm / 60 in
  • Width - Outside Rear Tires: 2511 mm / 98.9 in
  • Width - Tire Center Lines: 2140 mm / 84.3 in
  • Height - Front Axle Center: 596 mm / 23.5 in
  • Height - Exhaust Stack: 3256 mm / 128 in
  • Height - Top of Cylinders: 3040 mm / 120 in
  • Ground Clearance - Rear Axle: 339 mm / 13.3 in

Standards

  • Brakes: ISO 3450
  • ROPS/FOPS: ISO 3471; ISO 3499
  • Sound: ISO 6394; ISO 6395
  • Steering: ISO 5010

Air Conditioning System

  • Air Conditioning: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Pedir orçamento

Entraremos em contacto com a melhor proposta.

Para enviar, é obrigatório concordar com os termos abaixo:
Concordo com o tratamento dos meus dados, segundo a política de privacidade, de acordo com as boas práticas do Regulamento Geral sobre a Proteção de Dados (GDPR).
Concordo com a partilha dos meus dados com a empresa STET, para que ela possa dar resposta ao meu contacto.