STET

140/140 AWD – MOTONIVELADORAS

  • ColeçãoColeçãoMOTONIVELADORAS
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel
carousel

Descrição

Reduce your carbon footprint with the latest in emissions reduction technology with the durable 140 motor grader. The 140 motor grader unites comfortability and productivity to get optimal performance on the jobsite. Get the best visibility with angled cab doors, tapered engine enclosure, and sloped rear window.

Informações Tećnicas

  • Base Power (1st Gear) – Net: 133 kW
  • Operating Weight – Typically Equipped: 19344 kg
  • Blade Width: 3.7 m

Mais informações

Engine

  • Base Power (1st Gear) – Net: 133 kW / 179 HP
  • Engine Model: Cat® C9.3
  • Bore: 115 mm / 4.5 in
  • Stroke: 149 mm / 5.9 in
  • Speed at Rated Power: 2,000 rpm
  • Base Power (1st Gear) – Net – Metric: 133 kW / 181 HP
  • Emissions: U.S. EPA Tier 4 Final/EU Stage V
  • High Ambient – Fan Speed – Standard: 1,400 rpm
  • Maximum Torque – VHP Plus: 1138 N·m / 840 lb/ft
  • Standard Capability: 43 °C / 109 °F
  • Torque Rise: 38%
  • VHP Plus – Gear – Net Power – Forward 1st: 133 kW / 179 HP
  • VHP Plus – Gear – Net Power – Forward 2nd: 141 kW / 189 HP
  • VHP Plus – Gear – Net Power – Forward 3rd: 149 kW / 200 HP
  • VHP Plus – Gear – Net Power – Forward 4th: 156 kW / 210 HP
  • VHP Plus – Gear – Net Power – Forward 5th: 160 kW / 215 HP
  • VHP Plus – Gear – Net Power – Forward 6th: 164 kW / 220 HP
  • VHP Plus – Gear – Net Power – Forward 7th: 168 kW / 225 HP
  • VHP Plus – Gear – Net Power – Forward 8th: 172 kW / 231 HP
  • VHP Plus – Gear – Net Power – Reverse 1st: 133 kW / 179 HP
  • VHP Plus – Gear – Net Power – Reverse 2nd: 141 kW / 189 HP
  • VHP Plus – Gear – Net Power – Reverse 3rd-6th: 149 kW / 200 HP
  • VHP Plus Range – Net: 133-172 kW (179-231 hp)
  • VHP Plus Range – Net – Metric: 133-172 kW (181-234 hp)
  • Displacement: 9.3 l / 567.5 in³
  • Number of Cylinders: 6
  • Derating Altitude: 3050 m / 10000 ft
  • High Ambient – Fan Speed – Maximum: 1,550 rpm
  • High Ambient – Fan Speed – Minimum: 500 rpm
  • High – Ambient Capability: 50 °C / 122 °F

Power Train

  • Forward/Reverse Gears: 8 Forward/6 Reverse
  • Transmission: APECS, Direct Drive, Powershift
  • Brakes – Service: Multiple Oil Disc
  • Brakes – Service – Surface Area: 23000 cm² / 3565 in²
  • Brakes – Parking: Multiple Oil Disc
  • Brakes – Secondary: Dual Circuit

Hydraulic System

  • Circuit Type: Parallel
  • Pump Type: Variable Piston
  • Pump Output: 210 l/min / 55.7 gal/min
  • Maximum System Pressure: 24150 kPa / 3500 psi
  • Reservoir Tank Capacity: 64 l / 16.9 gal (US)
  • Standby Pressure: 6100 kPa / 885 psi

Operating Specifications

  • Top Speed – Forward: 46.6 km/h / 29 mile/h
  • Top Speed – Reverse: 36.8 km/h / 23 mile/h
  • Turning Radius – Outside Front Tires: 7.8 m / 25.59 ft
  • Steering Range – Left/Right: 50°
  • Articulation Angle – Left/Right: 20°
  • Forward – 1st: 4.1 km/h / 2.5 mile/h
  • Forward – 2nd: 5.5 km/h / 3.4 mile/h
  • Forward – 3rd: 8 km/h / 5 mile/h
  • Forward – 4th: 11 km/h / 6.9 mile/h
  • Forward – 5th: 17.1 km/h / 10.6 mile/h
  • Forward – 6th: 23.3 km/h / 14.5 mile/h
  • Forward – 7th: 32 km/h / 19.9 mile/h
  • Forward – 8th: 46.6 km/h / 29 mile/h
  • Reverse – 1st: 3.2 km/h / 2 mile/h
  • Reverse – 2nd: 6 km/h / 3.7 mile/h
  • Reverse – 3rd: 8.7 km/h / 5.4 mile/h
  • Reverse – 4th: 13.5 km/h / 8.4 mile/h
  • Reverse – 5th: 25.3 km/h / 15.7 mile/h
  • Reverse – 6th: 36.8 km/h / 23 mile/h

Service Refill

  • Fuel Capacity: 394 l / 104 gal (US)
  • Cooling System: 57 l / 15 gal (US)
  • Hydraulic System – Total: 100 l / 26.4 gal (US)
  • Hydraulic System – Tank: 64 l / 16.9 gal (US)
  • Diesel Exhaust Fluid: 22 l / 5.8 gal (US)
  • Transmission – Differential – Final Drives: 70 l / 18.5 gal (US)
  • Engine Oil: 30 l / 7.9 gal (US)
  • Tandem Housing – Each: 76 l / 20 gal (US)
  • Front Wheel Spindle Bearing Housing: 0.5 l / 0.13 gal (US)
  • Circle Drive Housing: 7 l / 1.8 gal (US)

Frame

  • Drawbar – Width: 76.2 mm / 3 in
  • Circle – Diameter: 1530 mm / 60.2 in
  • Circle – Blade Beam Thickness: 40 mm / 1.6 in
  • Drawbar – Height: 152 mm / 6 in
  • Circle – Height: 138 mm / 5.4 in
  • Front Frame Structure – Height: 321 mm / 12.6 in
  • Front Frame Structure – Width: 305 mm / 12 in
  • Drawbar – Thickness: 12.7 mm / 0.5 in
  • Front-Top/Bottom Plate – Width: 305 mm / 12 in
  • Front-Top/Bottom Plate – Thickness: 22 mm / 0.87 in
  • Front Axle – Height to Center: 596 mm / 23.5 in
  • Front Axle – Wheel Lean – Left/Right: 18°
  • Front Axle – Total Oscillation per Side: 32°

Tandems

  • Height: 506 mm / 19.9 in
  • Width: 201 mm / 7.9 in
  • Sidewall Thickness – Inner: 16 mm / 0.63 in
  • Sidewall Thickness – Outer: 18 mm / 0.71 in
  • Drive Chain Pitch: 50.8 mm / 2 in
  • Wheel Axle Spacing: 1523 mm / 60 in
  • Tandem Oscillation – Front Up: 15°
  • Tandem Oscillation – Front Down: 25°

Moldboard

  • Blade Width: 3.7 m / 12 ft
  • Moldboard – Height: 610 mm / 24 in
  • Moldboard – Thickness: 22 mm / 0.87 in
  • Arc Radius: 413 mm / 16.3 in
  • Throat Clearance: 166 mm / 6.5 in
  • Cutting Edge Width: 152 mm / 6 in
  • Cutting Edge Thickness: 16 mm / 0.6 in
  • End Bit – Width: 152 mm / 6 in
  • End Bit – Thickness: 16 mm / 0.6 in
  • Blade Pull – Base GVW: 11462 kg / 25269 lb
  • Blade Pull – Maximum GVW: 15541 kg / 34262 lb
  • Blade Down Pressure – Base GVW: 7275 kg / 16038 lb
  • Blade Down Pressure – Maximum GVW: 13294 kg / 29309 lb
  • Moldboard – Blade Width: 3.7 m / 12 ft

Blade Range

  • Circle Centershift – Right: 728 mm / 28.7 in
  • Circle Centershift – Left: 695 mm / 27.4 in
  • Moldboard Sideshift – Right: 660 mm / 26 in
  • Moldboard Sideshift – Left: 510 mm / 20.1 in
  • Maximum Blade Position Angle: 90°
  • Blade Tip Range – Forward: 40°
  • Blade Tip Range – Backward:
  • Maximum Shoulder Reach Outside of Tires – Right: 1978 mm / 77.9 in
  • Maximum Shoulder Reach Outside of Tires – Left: 1790 mm / 70.5 in
  • Maximum Lift Above Ground: 480 mm / 18.9 in
  • Maximum Depth of Cut: 715 mm / 28.1 in

Ripper

  • Ripper Shank Holder Spacing: 533 mm / 21 in
  • Ripping Depth – Maximum: 426 mm / 16.8 in
  • Ripper Shank Holders: 5
  • Penetration Force: 9440 kg / 20812 lb
  • Pry-Out Force: 12607 kg / 27794 lb
  • Machine Length Increase, Beam Raised: 1031 mm / 40.6 in

Scarifier

  • Front, V-Type – Working Width: 1205 mm / 47.4 in
  • Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holder Spacing: 116 mm / 4.6 in
  • Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holders: 5/11
  • Front, V-Type, 5 or 11 Tooth – Scarifying Depth, Maximum: 467 mm / 18.4 in
  • Front, V-Type, 5 or 11 Tooth – Working Width: 1031 mm / 40.6 in
  • Mid, V-Type – Scarifier Shank Holder Spacing: 116 mm / 4.6 in
  • Mid, V-Type – Scarifier Shank Holders: 11
  • Mid, V-Type – Scarifying Depth, Maximum: 292 mm / 11.5 in
  • Mid, V-Type – Working Width: 1184 mm / 46.6 in
  • Rear – Scarifying Depth, Maximum: 426 mm / 16.8 in
  • Rear – Working Width: 2133 mm / 84 in
  • Rear – Scarifier Shank Holders: 9
  • Rear – Scarifier Shank Holder Spacing: 267 mm / 10.5 in

Weights

  • Operating Weight – Typically Equipped: 19344 kg / 42647 lb
  • Gross Vehicle Weight – Maximum – Front Axle: 7745 kg / 17075 lb
  • Gross Vehicle Weight – Maximum – Rear Axle: 17268 kg / 38069 lb
  • Operating Weight – Typically Equipped – Front Axle: 5468 kg / 12055 lb
  • Operating Weight – Typically Equipped – Rear Axle: 13876 kg / 30592 lb
  • Gross Vehicle Weight – Base – Front Axle: 4238 kg / 9343 lb
  • Gross Vehicle Weight – Base – Rear Axle: 12736 kg / 28077 lb
  • Gross Vehicle Weight – Maximum – Total: 25013 kg / 55144 lb
  • Gross Vehicle Weight – Base – Total: 16974 kg / 37420 lb
  • Operating Weight – Typically Equipped – Total: 19344 kg / 42647 lb

Dimensions

  • Height – Top of Cab: 3308 mm / 130 in
  • Length – Counterweight to Ripper: 10136 mm / 399 in
  • Width – Outside Front Tires: 2511 mm / 98.9 in
  • Length – Front Axle to Mid Tandem: 6123 mm / 241 in
  • Length – Front Tire to Rear of Machine: 8912 mm / 351 in
  • Length – Front Axle to Moldboard: 2552 mm / 100 in
  • Length – Between Tandem Axles: 1523 mm / 60 in
  • Width – Outside Rear Tires: 2511 mm / 98.9 in
  • Width – Tire Center Lines: 2140 mm / 84.3 in
  • Height – Front Axle Center: 596 mm / 23.5 in
  • Height – Exhaust Stack: 3256 mm / 128 in
  • Height – Top of Cylinders: 3040 mm / 120 in
  • Ground Clearance – Rear Axle: 339 mm / 13.3 in

Standards

  • Brakes: ISO 3450
  • ROPS/FOPS: ISO 3471/ISO 3499
  • Sound: ISO 6394; ISO 6395
  • Steering: ISO 5010

Pedir orçamento

Entraremos em contacto com a melhor proposta.

Para enviar, é obrigatório concordar com os termos abaixo:
Concordo com o tratamento dos meus dados, segundo a política de privacidade, de acordo com as boas práticas do Regulamento Geral sobre a Proteção de Dados (GDPR).
Concordo com o compartilhamento dos meus dados com a empresa STET, para que ela possa dar resposta ao meu contacto.